FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Right duno if you remember i had a bump a while back.
Well ive got a new bonnet and it looks 10x better. But now the drivers side wing is sitting to high. Someone i asked said its because of the slam pannel, ive looked down the front and it is bent as well as the raidator being pused back lol .
So do i need a new slam pannel to get the wing to sit right or is it more serious than that. ???
|
Behr
Member
Registered: 5th Feb 07
Location: Hemel Hempstead
User status: Offline
|
slam panels have to be cut out and welded back in so a new one is not the best option. see if you can bend it back....
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
If i bend it back will that get the wing so sit properly.
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Depends on how far out it is. They can be bent back pretty easily
Fitting a new one isn't a massive job though, just spot welds in in the corners, but it needs to be straight.
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Not sure if it is the slam pannel but ive found a pik in sum1s garage and this is what i mean, could that black beam being bent affect the wing being pused up a bit.
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
That's the lower cross member, If thats bent then the car is pretty fucked. You need to replace that urgently as having the wing poking out in the wrong direction is the leas of your worrys as that pannel keeps the front end of the suspension straight.
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
so if i get this
http://www.gbkperformance.co.uk/index.php?main_page=product_info&products_id=5446
will the car be ok then.
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
quote: Originally posted by ed
That's the lower cross member, If thats bent then the car is pretty fucked.
No it isn't.
It may just be bent, and you need a new one welded in. Although, the chassis leg may be bent. If it is, you can either have it jigged or scrap it.
|
ellouise9
Member
Registered: 11th Jul 07
Location: Pompey
User status: Offline
|
i Changed my slam panel aint dat hard at all. All i did was order a new one, cut the spot welds out and put the new one in did spot welding and sprayed the panel.
But yer there was no way i could bend the panel back by the looks of things you can't either
Ellouise
|
Whittie
Member
Registered: 11th Aug 06
Location: North Wales Drives: BMW, Corsa & Fiat
User status: Offline
|
quote: Originally posted by Behr
slam panels have to be cut out and welded back in so a new one is not the best option. see if you can bend it back....
Its only a few bolts
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
Whittie, thats the bumper bar. The slam panel is the topone with the bonnet catch in it.
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
whittie thts the pannel im on about yes myne is slightly more bent tho as its managed to hit the radiator lol.
What did you do to sort it?
And can i replace it easy enough?
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
The bumper bar is held on by two nuts IIRC.
Take bumper off and then take off bumper bar. Put new bar on. Easy fix.
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Nice one dean
Anychance someone could find one on the net for me as im not sure if ive got correct one.
Bumper reinforcment £60
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
Try Autovaux.
|
Behr
Member
Registered: 5th Feb 07
Location: Hemel Hempstead
User status: Offline
|
http://www.corsacentre.com/Nova%20corsa%20vauxhall%20parts/Detail.asp?PID=1867&CatID=13&CarID=1
|
Whittie
Member
Registered: 11th Aug 06
Location: North Wales Drives: BMW, Corsa & Fiat
User status: Offline
|
quote: Originally posted by FruitBooTeR
whittie thts the pannel im on about yes myne is slightly more bent tho as its managed to hit the radiator lol.
What did you do to sort it?
And can i replace it easy enough?
Easy as 123 mate, literally all you have to do is take the bumper off, unscrew 4 screws from the slampanel, put new one on, and then but the bumper back!
|