weerab
Member
Registered: 11th Feb 06
Location: Allanton, North Lanarkshire
User status: Offline
|
posted this up in the help and advice zone but no reply so ill try it here
how hard is it to wire up after makert guages for example oil,vacumm,volts.......etc etc..
and where is best to display them on a corsa b 
|
TheCam
Member
Registered: 16th Mar 07
Location: Kirkcaldy
User status: Offline
|
You can get a guage holder which holds 2 guages to sit on top of your clock which looks quite good imo usually on ebay,
it depends what guage your wiring up to how hard it is. obviously wiring up a air/fuel guage would be harder to do than say a volt meter.
sorry i cant help more
|
joey736
Member
Registered: 11th Mar 07
Location: hexham, near newcastle drives: Aurora XE
User status: Offline
|
im also interested to know this, as i am considering an oil temp/pressure gauge for mine, any advice out there???
|
Welsh Dan
Member
Registered: 23rd Mar 00
User status: Offline
|
Easy to wire gauges in usually. Not sure in a Corsa, but theres usually a spare power lead, switched live and earth by the stereo.
With regards to oil temp/pressure, see if someone does a sandwich plate which fits between the oil filter and engine. It should have two holes which you can plug the sensors into, and makes it a bit more straight forward.
|
