noodlesluke
Member
Registered: 2nd Jun 07
User status: Offline
|
--------------------------------------------------------------------------------
Hi Guys,
I'm gonna attempt to remove the back bumper.
I know there is 3 screws as you open the boot and then 4 underneath.
But i heard there is 2 on either side which connect to the wheel arch etc.
How are these taken off, what tool is used? And i read something about a plastic thing?
|
Forbes789
Member
Registered: 19th Sep 07
Location: Buckie, Moray
User status: Offline
|
jack up the car, put it on axle stands or bricks if you aint got none,you need to remove the back half of the arches thats 4 or 5 plastic stud things, think there 10mm then once there off pull the arch back abit then thats the side ones done, undo the 3 under the boot lid the it just slips over the little plastic brackets
job done
|
B3KAN
Member
Registered: 15th Feb 07
Location: Inverness, Highland
User status: Offline
|
The car doesnt need jacked up on axle stands to remove the bumper
3 screws as you open the boot and then 4 underneath
2 on either side which connect to the wheel arch - Held on with little plastic 10mm nuts you dont need to remove them all just the 2 closest to the rear bumper then the bumper will come off
If your car is really low you may need to jack it up slightly to get to the nuts at the sides
|