KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
& how would i stop it from coming back out?
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
either the very end has snapped off or the circlip is missing
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
Replace the circlip or replace the shaft.
But you need to know what type of gearbox you are running to know what shafts you are running! and if you are running the 1.2 box and you intend to fit the f20 box then you will need to change the shafts/joints anyway
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
mmm ok, tomorrow afternoon ill pull the shaft right out and have a look at the end check for snappage, and a circlip ill try see if theres one missing too, thanks peoples ;]
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
quote:
Originally posted by ainsley_brader
Replace the circlip or replace the shaft.
But you need to know what type of gearbox you are running to know what shafts you are running! and if you are running the 1.2 box and you intend to fit the f20 box then you will need to change the shafts/joints anyway
ok, so if its an f18 as standard i belive will the shafts go into the f20?? and what joints need to be changed please mate
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
1.2 will be an f10 or f13, think the 2.0 8v only came with f16 and f20
If it is an f16 or an f18 then the shafts will be fine with an f20
if its an f10 or f13 then the shafts wont fit!
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
ok excellent mate, now i just need to find someone to fit it for me... dad said hell buy me a new clutch too so might aswell change it, & the flywheel can i get an uprated one? whats the performace change would you know pal?
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
& i did check for numbers but i couldnt see any, is there no way of telling from looking at it, wether there difffrent sizes or what not?
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
and ok, i only got f18 in my head because someone told me f18 came with the 2.0 8v but you sound like you know what your on about so il ltake your word for it too
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
got another problem too, haha,,, not so much a problem but an annoying hissing sound coming from brake pedal, as if its letting air out lift the pedal backwords and it lets more air out, push it down its normal and when you let it off lets the air out, any reason why this is?
|
KerbD It
Member
Registered: 28th May 08
Location: Luton
User status: Offline
|
now i have been told, the drive shafts could come out because the engine moutns are loose or worn this could be true? if so whos got engine mounts for sale?? what do i put init? corsa b 1.2 engine mounts??
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
Would need new 2.0 conversion mounts then I'd suppose. 
I'm running an F16 gearbox on my XE which is fine tbh  may go for an F20 if I see one cheap!
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
I doubt its an engine mount problem tbh.
Hissing will be a leak somewhere on the brake servo pipe.
Is there a plate bolted to the gearbox around the drivers side diff oil seal?
|
