dwcars1.4
Member
Registered: 13th Dec 06
Location: Blackburn Drives: corsa b 1.6 sport
User status: Offline
|
can a 1.6 16v run from a 1.4 16v ecu??
if not what are the differences???
|
B3KAN
Member
Registered: 15th Feb 07
Location: Inverness, Highland
User status: Offline
|
No
The ecu will also be codded so you will need the chip from the key 
|
dwcars1.4
Member
Registered: 13th Dec 06
Location: Blackburn Drives: corsa b 1.6 sport
User status: Offline
|
ok, is there any other ecu i can use? or how do i gain teh chip from the key?? total noob on this and the fecked 1.4 is being replaced with a 1.6
|
B3KAN
Member
Registered: 15th Feb 07
Location: Inverness, Highland
User status: Offline
|
The key opens and you can remove the chip then take the old chip out off your key and fit new 1
Na you will need an ecu for that engine
|
dwcars1.4
Member
Registered: 13th Dec 06
Location: Blackburn Drives: corsa b 1.6 sport
User status: Offline
|
so ill need to get a hold of a 1.6 ecu for it aswell
|
luke85
Member
Registered: 26th Nov 07
Location: Chesterfield
User status: Offline
|
I have a 1.6 ECU with chip and transponder pickup in case you go for the X16XE engine
|
luke85
Member
Registered: 26th Nov 07
Location: Chesterfield
User status: Offline
|
Not sure if the loom is the same as the X14XE though, someone would need to clear that up
|
dwcars1.4
Member
Registered: 13th Dec 06
Location: Blackburn Drives: corsa b 1.6 sport
User status: Offline
|
how much for it deliverd m8?? u2u me please
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
so long as the plugs on the 1.6 ecu are the same as the 1.4 one the wiring will be fine. or just get the wiring with the ecu. far easier to unplug the loom from the car and leave it on the old engine then you only need to unplug 2 plugs.
|
