bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
bought a pioneer deh-8000r of mate, he had it running 2 12" subs, put it into my car and it perfectly runs my 1 12" sub,
then i soldered all the wires up neatly etc and now i cannot get any sound from the sub
there is power to the amp as i have checked and the light is on
the sub is turned on the head unit
we have changed rca leads
changed subs
changed amps
so im left with the head unit!
is is possible for the sub outputs to break at all? all fuses are o.k and been replaced?
any one got any ideas??
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
on pioneer head units ill think you'll find you need to turn the preouts on, i had to on my 6400R.
Read the book and if that fails, check your preouts on the head unit with a multimeter. If they arent giving a reading, the solder points have come loose on the headunit board. This happened with a kenwood unit i had.
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
so did you manage to get these solder points fixed then??
i will check to see if they have any voltage 2moro! cheers tho
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
yup you just need to know what ur doing and be very cautious when taking it apart, see if its under guarantee first. I did mine myself, just a case of soldering the cracked points.
[Edited on 16-04-2003 by AustinPXX]
|
