inverted_577
Member
Registered: 24th Jan 09
Location: Nailsea, North Somerset
User status: Offline
|
has anybody fitted a saxo pump to there power steering if so hoe easy is it to fit and what do you have to do to fit it and wire it up?
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Why bother when you can get factory EPS (which is much better than the saxo setup) from a 98+ 1.0 or 1.2 16v Corsa B.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Oh and someone on PNG has done it.. Even he says its a waste of time
|
inverted_577
Member
Registered: 24th Jan 09
Location: Nailsea, North Somerset
User status: Offline
|
someone said you need a speed signal for the epas form the speedo but my speedo is cable not electric
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
change to electric then.. The transducer screws in your gearbox without any mods and you only need to do some very very simple wiring.. (3 wires.. black +12, brown earth, blue/red speed signal).
|
inverted_577
Member
Registered: 24th Jan 09
Location: Nailsea, North Somerset
User status: Offline
|
ok cool ill do it that way then cheers for the help daveylc
|
aaronc190
Member
Registered: 19th Aug 08
Location: ireland
User status: Offline
|
why do you need a speed signal for power steering??
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Eps is speed sensative. You can buy controllers to fake the speed signal
|