Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
http://cgi.ebay.co.uk/BOOST-CONTROLLER-WHITE-BOOST-GAUGE-KIT-ANY-PETROL-CAR_W0QQitemZ200359524822QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2ea65bb9d6&_trksid=p3286.c0.m14&_trkparms=65:15|66:3|39:1|293:3|294:100 will this do the trick, wana raise my boost to 0.9/1 bar
|
crazybrightman
Member
Registered: 30th Mar 09
Location: leicestershire
User status: Offline
|
yes, but on what/car engine?
manual boost controlers are a bit primative tbh but at boost setting should be ok depending on the above.
the cheapest tick is just use a pipe wth a hole inbetwen the wasgate actuator and pressure feed. it has the same results but slower spooling speed, it is free though!
idealy you want an electronic boost controller for fastest spool but they are over £100 so not really worth it unless the ecu has control of it.
[Edited on 10-07-2009 by crazybrightman]
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
Mr2 turbo
I dont mind paying a little if its going to benefit lol
cant really afford electric
|
crazybrightman
Member
Registered: 30th Mar 09
Location: leicestershire
User status: Offline
|
what rev? as they all have different boost limits the stock ecu's can take?
having said that none cut fuel until at least 1bar iirc so you should be fine, just dont go above that.
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
yours is a rev1 or 2 so dont go above 1.1bar. above that and you'll need to look at getting a rev3 metal headgasket and look at the fuelling. Ive got a blitz dual sbc set at 1bar but ive also got a fuel cut defenser which is pretty essential. I wouldnt go above 1bar without knowing the fuelling is ok and getting a bigger intercooler especially on the rev1/2 engines
[Edited on 10-07-2009 by jake]
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
So yeah I'll 100% need a new SMC prior to fitting the MBC?
I was gonna go 0.9 bar no higher, should still see an upgrade
ordered grade 7 plugs too
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
no mate not 100% but id recommend it. once i fix my speedo im getting one of the ebay intercoolers, there about 109£ posted and heard good things on mr2oc. im still on the standard intercooler at 1bar and its been fine up until now but i dont drive around with a heavy foot all day long
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
lol I need to fix my speedo too, its always on 0kmph
I might just whack it up to 0.9 bar now then, and then 1 when I get my new inetrcooler
|
kz
Member
Registered: 9th Aug 02
Location: Southend, Essex Drives: Mini Cooper S
User status: Offline
|
This is the same one I have Jas, if you look on the post I made today in general chat. Most people seem to say it's not a very good one... it certainly doesn't seem to make much of a difference lol. And people over three forums I've posted on now are still spilt between whether or not to use the bleed valve
|