Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
Hi,
As above.I have just fitted a X16XE Engine into my Car (X14XE) And it is all connected up except these;
Any Help much Appreciated.
Thanks
Craig
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
Goes to the starter motor
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
I thought it did but wasnt sure.That must mean that there's 2 that go on the Starter Motor.
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
yep main feed, and a ignition feed then one off to earth.
the other large block connector i think goes to the SAP secondary air pump. and the last small one looks like its something to do with a speed sensor... does the engine you've put in have electronic spedo?
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
quote: Originally posted by Richardhhha
yep main feed, and a ignition feed then one off to earth.
the other large block connector i think goes to the SAP secondary air pump. and the last small one looks like its something to do with a speed sensor... does the engine you've put in have electronic spedo?
Well there is 2 Threads on the Starter Motor,Which have both got Earths on at the Min,So there must be 4 Earths that go on the Starter.1 Small one,1 Large one,And then that Black & Red Large one.
Oh what a man you are,There is a Sensor on the Gearbox which where that Little Black one goe's i thick.
So that's 2 down,Just 2/3 to go
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
yeah there should be 2 terminals on the starter.. the main power ones go on just one of them obviously te thicker of the 2 and the tiny black one shoud go on the smaller of the 2... thats how starters work..
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
quote: Originally posted by Richardhhha
yeah there should be 2 terminals on the starter.. the main power ones go on just one of them obviously te thicker of the 2 and the tiny black one shoud go on the smaller of the 2... thats how starters work..
Yeah but that above doesnt seperate.Think i know now anyhow so it's all Gravy.
Just need to know what the others are?
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
Also does a Speedometer from a X16XE G/Box Fit into a X14XE Box?As i cant get it to fit as it is to Big for the Hole
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
is it a electronic one of mechanical one?
as thats the only real difference, due to the x14's gearbox could ahve been bolted straight onto the x16
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
Electric.
The X14XE G/BOX Was Fcuked that's why i changed it for the X16.
|
Craig P
Member
Registered: 9th Mar 08
Location: Carlisle,Cumbria
User status: Offline
|
?
|