ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
Was keeping on to all of this to build an engine in the future but thats not gonna happen i dont think lol.
anyway heres whats included
Honda CBR1100 Blackbird Throttle bodies. These are Tapered and the spacing is spot on to the x14xe/x16xe/c16xe ect engines down to a mill or two. so easier to get a manifold made up and less restrictive due to the runner being perfectly straight.
16xe pistons with conrods, these have been pocketed by SBD so pretty much any cams can be used (think the pockets are +2mm) not been used since being pocketed (cost of over £160 to be done)
SBD uprated valve springs and Titanium caps, un used (slight rusty colour to them by my brand new kent springs looked the same)
New packet of ARP con rod bolts.
Ideal if you want to rebuild your engine and plan for further mods this is the main things you will need.
you could use a std inlet cut down (bodge) or cut down further (as pictured) keeping the std injector boses and then have alloy tubes welded on for the TB's to fit. this way these will work on the std management. will also include the original fuel rail, reg and injectors for the TB's so ideal if you plan on using management.
£250 for the lot delivered. would certainly cost you well over double that from SBD and that would be without the Tb's and the ARP's
|