kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
Im thinking that if i get enough interest in the big parts i may break this up.
If i get a buyer for the shell and engine than i will definately break it.
anyway heres the spec...
It is a bright pink/purple shell, white inside, with a full weld in roll cage which goes through the dash into the front suspension strut tops and has door bars and a 'X' across the back.
The shell itself is in prety good condition for rust etc.. it has a tiny bit by the windscreen but the arches still have a bit of lip on them and the boot and floor and front valance are all solid as can be seen in the picture.
It will come with the brake bias pedal box system and hydraulic handbrake with braided lines running through the car. - £850
Full c16xe 1.6 16v engine conversion for a nova from a corsa gsi which has a 4 branch, cams and chipped ecu.
The engine will come with harry hockley mounts, shafts, loom, ecu, gearbox, protech 4 branch and full exhaust.
The engine starts up first time everytime and has never put a foot wrong, goes very well too. - £450
2 blue cobra monaco bucket seats with subframes for a nova - £80
1 red sparco 3 point harness and 1 green 4 point harness - £50 for both
mountney steering wheel with boss for nova/corsa - £40
sparco gearknob - £15
panel of switches that control the fan and horn etc and has a battery cut off switch. - £20
fibreglass boot which is on boot pins - £80
standard bonnet on bonnet pins. - £20
full gsi kit for a nova mk2 (front bumper has 2 holes in the side for mounting) comes with front bumper,skirts and rear bumper. - £80
2 litre 256mm brakes (very good pads and discs) - £60
Parts on their own
hydraulic handbrake setup its just attached to standard handbrake - £80
brake bias pedal box system - £100
full set of braided lines - £30
protech 4 branch manifold -£60
exhaust system sounds very nice - £60
im not sure how to upload pics yet so here are the links.
It current has no mot or tax but i can get mot if needed.
I also has a full twin 40 carb setup for this engine with inlet manifold which can go with the car at extra cost.
The carbs are on the manifold ready and have been already setup to run on the c16xe
http://s423.photobucket.com/albums/p...23-08-09-1.jpg
http://s423.photobucket.com/albums/p...1_20-07-09.jpg
http://s423.photobucket.com/albums/p...0_25-09-09.jpg
http://s423.photobucket.com/albums/p...2_25-09-09.jpg
http://s423.photobucket.com/albums/p...1_23-08-09.jpg
http://s423.photobucket.com/albums/p...t=IMG_0301.jpg
i can take more pictures if wanted.
any questions feel free to ask.
the car is located in bristol.
LET ME KNOW WHAT PARTS YOU WANT AND ILL GIVE YOU A PRICE.
Cheers ryan
[Edited on 01-10-2009 by kinger01]
[Edited on 01-10-2009 by kinger01]
[Edited on 01-10-2009 by kinger01]
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
ttt
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
up
|
jake_rob
Member
Registered: 25th Feb 09
Location: Offerton, Greater Manchester
User status: Offline
|
pics of 4 branch please, im guessing it will fit an x14xe?
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
alryt mate yes it will fit an x14xe and ill get a pic up tomorrow.
cheers ryan
|
sri boy
Member
Registered: 31st Aug 09
Location: glasgow springboig
User status: Offline
|
much 4 4 branch ecu n cams cheers rob
[Edited on 01-10-2009 by sri boy]
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
well i wont be splitting the cams or ecu from the engine package and its £60 for the 4 branch.
cheers ryan
|
sri boy
Member
Registered: 31st Aug 09
Location: glasgow springboig
User status: Offline
|
whts lowest u would go on engine package chers m8t
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
Hey there, im intrested in your Engine package. Im in the process of a project corsa b and need everything to get the engine going, do you still have the key for the ecu? or can i still use the same key from my 1.0 GLS engine that is in the car at the moment? How much for the engine package and to Courier up to Aberdeen, Scotland?
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
alryt mate yea i still have the key for it as its non immobilised so any key should be fine i think.
i only have the mounts,shafts and wiring for a nova not a corsa b mind.
cheers ryan
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
Okay, shit i forgot about that. Sorry, cheers anyways
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
ttt
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
up
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
bumpp
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
ttt
|
Raz18
Member
Registered: 15th Mar 09
Location: West Midlands
User status: Offline
|
any chance of pics of the steering wheel and boss?
|
kinger01
Member
Registered: 16th Mar 09
User status: Offline
|
yes ill get you a pic of the wheel tomorrow.
cheers ryan
|
stampy_54
Member
Registered: 9th Sep 07
Location: Flintshire
User status: Offline
|
how much would postage be on protech 4 branch?
|