c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Ive just bought a early xe loom but i have a problem it has no wires or plug so a can match to the corsa loom or do i need to split the wires or the ecu wires to go on corsa loom
|
mattcape
Member
Registered: 4th Aug 05
Location: Kings Langley Drives: Astra H
User status: Offline
|
you need to wire it in under the kick panel in the drivers side footwell matches colour for colour pretty much or someone on here sells plug and play leads to make your life alot easier 
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Ana how to do that but the engine loom as no plug its only got 1 4 ecu
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
Leave the ECU plug on. You should have some wires not connected to anything then that normally have the 3 plugs on, Think the pugs missing should be 2 black and one green.
Sounds like somebody has cut the plugs off to wire into a conversion, Is the loom from a Corsa?
You have 2 choices, Solder the wires to your Corsa loom in drivers footwell which means cutting your Corsa plugs off.
Alternatively you can go get the plugs off a Cav or Calibra from a scrap yard, They'll be in the drivers footwell. Then solder them onto the bare XE wires.
That way you can buy a conversion loom sold on here.
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
These are the plugs that need to go to your corsa loom.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Cheer but av cut the plugs of the corsa as its got done ages ago then a wrong wire touch another and melted but help was great
|
