Tedney
Member
Registered: 16th May 08
Location: North Yorkshire
User status: Offline
|
I need to change some of the bulbs behind the heater control panel, so was wondering how this is removed. How do you also remove the round part on the passenger side of the dash, the heater vent surrounds etc? As I'm thinking of painting these gloss black while there off. Cheers.
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
corsa i assume?
if you roll the vents down, you will see two pozi-drive screws that need to be removed, these hold the mfd down. Lift the mfd out the way and then remove the hazard switch.
Then...on the recirc slider pull off the 'handle' and pop the plastic bit that the slider sits in, the 'fascia' bit - oblong shaped plastic part. Im sure there is then two screws behind that. Once they are out...the whole lot pulls out.
[Edited on 08-03-2010 by chrex]
|
Tedney
Member
Registered: 16th May 08
Location: North Yorkshire
User status: Offline
|
Yeah on a corsa mate, sorry forgot to put that. Thanks alot mate. You have an idea as to how you remove the rounded edge on the passenger side of the dash? Cheers.
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
that i have never done...but i think its got bolts underneath. take out the glovebox and have a good look. yea i think there are 4 hex head bolts...
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
Glovebox out, one screw at the side, about 4 underneath
|
Tedney
Member
Registered: 16th May 08
Location: North Yorkshire
User status: Offline
|
Cool cheers guys. Thanks for the help .
|