dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
im lookin for cams for my c20xe just want to kno wot to look for in the spec to match standard pistons if you get me, like wots the longest duration etc... im pretty sure its 270 but not 100% any one know???
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
N e one?
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
I'm interested to know this as well. Probably best sticking a thread up in the help zone mate.
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
standard ones. not much point putting cams in on standard pistons because the standard cams are good for 180bhp or so. Plus the valve clearances are that slight that you'll end up killing them as they WILL touch at some point when you're giving it stick.
Pistons need cams, and the cams need pistons.
|
lostboy
Banned
Registered: 29th Jan 09
Location: Durham
User status: Offline
|
You could put some mild ones in but chrex makes a point.
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
Ah wot I thort cams give a good 15 bhp gain! I've seen some 270 cams, they will give gains won't they?
|
lostboy
Banned
Registered: 29th Jan 09
Location: Durham
User status: Offline
|
They can but other mods will compliment them nicely, have a look here for more info.
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
yea, but the clearances are the main problem...especially at higher rpm's. Unless you have the cut-outs in the pistons enlarged...you'll more than likely be putting new valves in before long.
i wouldnt risk it tbh.
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
Depends on lift/duration, 264 tend be largest, but could get 270 with I thnk its les lift, bt with the duration. I built an xe wit rods, wossners, headwork, newman 270s, r1 carbs + tle exhaust made 190 at wheels whch rwd wrk 225 at fly. Bt id ring newman I rate them beta than kent and piper
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
hmm havent got alot of money tho, how much would a set of newman cost??
|
lostboy
Banned
Registered: 29th Jan 09
Location: Durham
User status: Offline
|
http://www.lmfvauxhall.co.uk/store/manufacturers.php?manufacturerid=60
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
would i go for phase 1 or 2? coz i want a good gain but phase 2 says for use with throttle boddies, do u have to?
|
dale87
Member
Registered: 19th Feb 06
Location: West Mids :)
User status: Offline
|
I've got kent AST1612 cams and oversized valves in my c20xe with standard pistons. Not sure on the lift, duration etc but mine have been fine for 3 years and the car gets death everytime I take it out lol.
|
lostboy
Banned
Registered: 29th Jan 09
Location: Durham
User status: Offline
|
quote: Originally posted by dalejones
would i go for phase 1 or 2? coz i want a good gain but phase 2 says for use with throttle boddies, do u have to?
Yes, you wouldn't get away with phase 2 without throttle bodies hence why it says for use with throttle bodies, they don't say that shit for fun.
|