bracey123
Member
Registered: 24th Oct 08
Location: parkhead, Glasgow City
User status: Offline
|
lookin to buy some rev counters for my car but will need cable drivin ones, is there anything else i need to make the rev counter work? car is a 1995 corsa 1.2 twist
|
bracey123
Member
Registered: 24th Oct 08
Location: parkhead, Glasgow City
User status: Offline
|
anyone?
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
And how do you propose to run a cable driven rev-counter?
|
bracey123
Member
Registered: 24th Oct 08
Location: parkhead, Glasgow City
User status: Offline
|
sorry i meant like the speedometer is cable drivin, but is there anything thts needed to make the rev counter work on a non rev counter corsa or is it just a straight swap?
|
Archie
Organiser: Scotland Premium Member
Registered: 18th Dec 07
Location: South Ayrshire
User status: Offline
|
Green feed wire from the ignition coil if memory serves me rightly.
|
bracey123
Member
Registered: 24th Oct 08
Location: parkhead, Glasgow City
User status: Offline
|
is the wiring already there?
|
SXi_Tim
Member
Registered: 11th Mar 03
Location: South Yorkshire Drives: RS3, LET B
User status: Offline
|
When i had an 1994 corsa without the rev counter i put some sri clocks into it with a rev counter and it worked straight off.
|
craig_s
Member
Registered: 5th Mar 06
Location: Birmingham Drives: mk4 astra gsi
User status: Offline
|
wiring should already be there,iirc.
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
Wiring is not there on all of them. Plug them in first, see if the rev counter works, if not you can take a feed from the ECU loom.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
If the wiring is not there you can transplant the 'pin' with a length of green wire from another car and then run it to the green on the coil or you should find it in the 9 pin plug in the drivers side kick panel.
|