chris_uk
Premium Member
Registered: 8th Jul 03
User status: Offline
|
yup.. ive just put together a small shopping list of some more internal parts of the engine.
8.9:1 +0.020 Wiseco Pistons (needs rebore)
Forged Eagle Rods
+1mm oversized GM Racing valves
GM Racing Duel valve spring kit
coupled with a new head gasket and inlet gasket and a smaller s/c pulley i should be looking at about 300bhp / 230ftlbs
|
Nath
Member
Registered: 3rd Apr 02
Location: MK
User status: Offline
|
Can I have some seeds from your money tree?!
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
forged rods, double valve springs, big valves.... thats a lot of kit for a modest 300bhp :S
What engine?
|
chris_uk
Premium Member
Registered: 8th Jul 03
User status: Offline
|
its a Z22se engine adam, the 2.2.
the rods and standard pistons are not capable of running 300+bhp, the new stuff would be fine running much much more, all id have to do is change the eaton supercharger to a harrop one and have 350-375 bhp.
[Edited on 03-08-2010 by chris_uk]
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
bit surprised at that...
I was thinking you were going to say 1600 mini or something.
VX220 - should be fun with a SC and 300+
|
FlamingCorsa
Member
Registered: 22nd Apr 03
Location: Shropshire
User status: Offline
|
wot power did u get upto after re map with courtney?
how mucho are you expeting to spend on this?
i wish i had your spending abilites, i am rubbish at spending! i am moaning at the min about insuring the vx or van, and needing to buy a secoind hand bug to get van back sorted again after last track day! lol
|
chris_uk
Premium Member
Registered: 8th Jul 03
User status: Offline
|
i got 270bhp @7000rpm.
but the fuel pump was dying at anything over 6400 and the standard rods just cant take anything more than that.
so i need to get it all sound and strong so i can make it a reliable 300+ bhp.
on the vid when i was changing at 5500rpm it had 227bhp, at 6000rpm it has 246bhp and at 7000rpm it has 270bhp.
this lot is going to cost about £700 and then im gunna send the car away for a week to get it all fitted for about £600 but that includes the re-bore and the machining for the valves.
|
FlamingCorsa
Member
Registered: 22nd Apr 03
Location: Shropshire
User status: Offline
|
thats not to bad then really! i was epxecing you to say more! is that you takeing engine apart or someone else?
seems worth it for piece of mind and knowing u can also get more power!
|
chris_uk
Premium Member
Registered: 8th Jul 03
User status: Offline
|
i have no mechanical problems with doing it, id have to find somewhere to get the re-bore done and the machining for the valves so i can just drop my car off and pick it up a week later with it all done, the lad knows this engine inside and out and he knows the machineshop aswell, so its just easier. .
plus i cant face taking everything to bits again lol
|
FlamingCorsa
Member
Registered: 22nd Apr 03
Location: Shropshire
User status: Offline
|
seems cracking price for them to do work so seems worth while doing it that way definatly :-)
|
chris_uk
Premium Member
Registered: 8th Jul 03
User status: Offline
|
yea i just need to get bits ordered, they are coming from the usa, whats the deal with the tax situation there?
|