MarkSport
Member
Registered: 22nd May 09
User status: Offline
|
Whoever Chooses to fit heated seats in a corsa b don't bother
I'm having a right ballache
everyone I've asked said,If the switches light up then the plugs will be there.Not on mine
Instead of having plugs It goes from the driver side switch to the passnger one then from that switch across the bottom of the glovebox and down under the seat.then back to the ecu
I am going to have to splice the wires to connect my calibra plugs i have
One thing i need to know is what ones to cut?
I have
Right switch
yellow/black
brown
black
green/white
Passenger Switch
2 green/white
2 brown
2 black
1 red/black
Now Im guessing the green white is something for both seats.then the red/black and yellow and black is the individual powers for ignition.
but then brown and black is the earth and power?
confused.can anyone help identify the wires?
[Edited on 22-08-2010 by MarkSport]
|
MarkSport
Member
Registered: 22nd May 09
User status: Offline
|
Right I cut into the driver side loom on the yellow and black as the haynes manual is saying and getting no power down there.
then i found this plug but its by the seatbelt 
not sure what thats too?
does anybody know which colours to chop PLEASE!
|
pow
Premium Member
Registered: 11th Sep 06
Location: Hazlemere, Buckinghamshire
User status: Offline
|
I've done a wiring diagram for these, I'll post it up later.
That plug is a bit of an unknown, my "fully loaded" GLS (AC) had it but not connected.
|
MarkSport
Member
Registered: 22nd May 09
User status: Offline
|
Ah cheers pow.if you could that would be ace.as i say the loom is there but there seems to be no plugs
|
MarkSport
Member
Registered: 22nd May 09
User status: Offline
|
any luck on the diagram pow?
|
MarkSport
Member
Registered: 22nd May 09
User status: Offline
|
quote:
Originally posted by pow
I've done a wiring diagram for these, I'll post it up later.
That plug is a bit of an unknown, my "fully loaded" GLS (AC) had it but not connected.
|
