fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
has anyone fitted bike tb's to a c16xe?
what is required to make this setup work?
Ive had a few c20let/c20xe corsas but never had tb's
|
Jabba
Member
Registered: 27th Nov 09
Location: co.durham
User status: Offline
|
id guess ud need
the throttle bodies
new fuel pump
new fuel piping to go to the bodies
and management
but i dont no for defonate(spelling??)
|
benton101
Member
Registered: 26th Aug 09
Location: Scotland - laurencekirk
User status: Offline
|
i have a xe on hyabusa tb's. for them to work you need a manifold (could maybe butcher old one) engine management and a wiring harness to go onto the throttle bodies and engine. (i bought one from the place that makes my engine management, its expensive but worth it) no need for a new fuel pump as long as you have an adjustable fuel pressure regulator the original one should be fine. depending on how much bhp you plan on having. you will need gauges for temps and air/fuel mix cause the temp gauges wont work once your own wiring harness has been fitted.
it sounds worse than it actually is. the worst bit is the price. i spent £1000 for throttle bodies, management, wiring harness.
hope this helps
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
not tbs, but if search for my project thread ive put r1 carbs on my c16xe
|
gazza808
Member
Registered: 30th Jun 08
Location: Peterborough
User status: Offline
|
quote: Originally posted by benton101
i have a xe on hyabusa tb's. for them to work you need a manifold (could maybe butcher old one) engine management and a wiring harness to go onto the throttle bodies and engine. (i bought one from the place that makes my engine management, its expensive but worth it) no need for a new fuel pump as long as you have an adjustable fuel pressure regulator the original one should be fine. depending on how much bhp you plan on having. you will need gauges for temps and air/fuel mix cause the temp gauges wont work once your own wiring harness has been fitted.
it sounds worse than it actually is. the worst bit is the price. i spent £1000 for throttle bodies, management, wiring harness.
hope this helps
temp gauge will work, just need to wire it up,
air/fuel mix isn't needed aslong as it mapped by some one who knows what they are doing(most RR will use their own), you'll find your self watching it.
[Edited on 18-04-2011 by gazza808]
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
quote: Originally posted by philip2
not tbs, but if search for my project thread ive put r1 carbs on my c16xe
you got a link mate? i cant find it?
whats needed to fit them?
|