ArdenAndy
Member
Registered: 22nd Jan 12
Location: Wrexham
User status: Offline
|
would removing the resonator on my 1.0 b make the sound any better? thankyou
|
BeetleGav
Member
Registered: 27th Jun 10
Location: lancashire, nelson
User status: Offline
|
not much. drill the airbox and it will sound ace. mine did
|
Kippers
Member
Registered: 27th Dec 10
Location: By the sea, Kent Drives: A nee naw
User status: Offline
|
Http://www.corsasport.co.uk/board/forumdisplay.php?fid=1
[Edited on 11-03-2012 by Kippers]
|
ArdenAndy
Member
Registered: 22nd Jan 12
Location: Wrexham
User status: Offline
|
should i keep the resonator and drill it? or get rid of it and drill it?
|
Daveskater
Premium Member
Registered: 29th Apr 08
Location: Oxford, UK Drives: Jap wagon
User status: Offline
|
Doesn't make much difference, you will also need to replace the airbox intake pipe though as it will still have an open connection to where the resonator used to be. Take the airbox out and remove the part on the wing side, will get some noise from that 
Numberwang!
Originally posted by AlunJ
I like you Dave, you are a man of men
Originally Whatapp'd by Neo
Dave's maybe capable of a drive-by cuddle
Look at my pictures
|
N3CRO
Member
Registered: 12th Apr 07
Location: Sandy, Bedfordshire
User status: Offline
|
If the resonator is what I think it is, removing it won't make any difference to sound or anything else.
If you want noise, derestrict the airbox then drill it.
|
ArdenAndy
Member
Registered: 22nd Jan 12
Location: Wrexham
User status: Offline
|
ahhh okay then, thanks! i had plans to defo derestrict it and get a good panel filter. would drilling a few holes make a better sound than removing the side nearest to the wing? dont think im going to bother with the resonator as i cant be botherd getting a new intake pipe ahaa
|
N3CRO
Member
Registered: 12th Apr 07
Location: Sandy, Bedfordshire
User status: Offline
|
Do both Andy. Thats what I did and it sounded great.
Can't remember if Dave drilled his airbox or not.
Also, I removed the cold air feed and that added some noise too.
|
BeetleGav
Member
Registered: 27th Jun 10
Location: lancashire, nelson
User status: Offline
|
heres mine incase you wanted to know where to drill it. mine sounded good like this aswel. real deep tone

|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
^^^^have you drilled above and below the filter?
|
BeetleGav
Member
Registered: 27th Jun 10
Location: lancashire, nelson
User status: Offline
|
no made sure of that. its only in that extra section to the left of the airbox
|