Mark.W
Member
Registered: 3rd Jan 07
Location: County Durham
User status: Offline
|
How and what is needed to get the speedo to work on a 20XE in corsa B?
|
Will94
Member
Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline
|
As far as i know, just use the transducer from the corsa's orignal gearbox. Unless yours is a 1997 on one with abs, because then the speedo is done thru the abs sensors
|
Mark.W
Member
Registered: 3rd Jan 07
Location: County Durham
User status: Offline
|
Mines a 1997 without ABS Will.
|
Mikey_j
Member
Registered: 1st Nov 08
Location: Ipswich
User status: Offline
|
If you cant use the transducer off of the original box then you need to use a corsa gsi hub with abs sensor and a relay off of a corsa c/astra g/meriva without abs and wire it in. Theres a guide on mig iirc
|
one-mr-t
Member
Registered: 4th Aug 09
Location: Greater Manchester
User status: Offline
|
Or just get cable clocks and have a cable driven speedo
|
Mark.W
Member
Registered: 3rd Jan 07
Location: County Durham
User status: Offline
|
Any links to that guide on mig web?
|
Vauxdan88
Member
Registered: 13th Feb 11
Location: Weymouth Dorset
User status: Offline
|
I did this the other week mate,go to a scrappy and find a 1.4 8v Corsa (that's what I got it off anyway). They have the black transducer in the gearbox,just cut the wires a few inches above it,remove it with the white bit attached that goes into the box,fit it into your box and wire colour for colour (3 wires). On the loom it's the plug with the orange bit,just cut the plug off.
|
Mark.W
Member
Registered: 3rd Jan 07
Location: County Durham
User status: Offline
|
Thanks for that Dan
|