AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Found this by chance more than anything, Thread on the Clio forum, PMed and made a 65mile trip Friday night to view it, before going back Sunday to collect. Didn't plan to, but ended up towing it home using my DCi....
Next morning, First time I had properly seen the car in the daylight. Its very clean for the miles and age, Including full service history and the spare key.
The reason we had to tow it back, Believed to be shreaded cambelt... Quick before picture...
Easy bits removed
This don't look good....
More stuff removed to help me gain access...
I have since got the head off (Pics tomorrow), 14 Bent valves, few broken rockers and found the cause of it all...
The above is one rib from the Aux belt, clearly made its way into the timing belt covers and caused the belt to slip, theres no broken teeth or anything on the cambelt, This is why its so important to have the aux belt changed when it should be done, and by somebody who knows what their doing, as I think its been destroyed due to the A/C compressor having 6 ribs, and the belt being put on the wrong 5 ribs.
More tomorrow.
|
LukesCorsaSXi
Member
Registered: 2nd Jan 11
Location: Sheffield
User status: Offline
|
Another nice Clio. What's the plan? Fix it up and sell it on?
|
Jamie-C
Member
Registered: 3rd Jun 08
Location: Ballycastle
User status: Offline
|
MG's are notorious for that, aux belt snaps and wraps round the bottom pulley causing the belt to slip. Cool car you got though, for keeps or money earner?
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Lovely colour that!! Would prefer to have that over my liquid yellow one! Guessing it was really cheap due to the belt issue?
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Plan is to fix it, Drive it for a couple of weeks, then sell to my mate, Hes fallen in love with it.
These Clio's are notorious for it too, mostly by, as per this, people fitting the Aux belt incorrectly on the aircon compressor.
Edges, I prefer LY! And reasonably cheap, Cost me £475, but it is bloody mint otherwise!
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Got the head off last night as I mentioned...
14 clearly bent
Can you say, bent?
Turns out its done all 16, Plus 9 rockers. All ordered up now, Most of it should be here tomorrow, Head is being skimmed, valve guides replaced too.
Hopefully have it fixed by the weekend, although Im now lacking time!
May be another update tomorrow.
|
csifku
Member
Registered: 14th Aug 12
Location: Maidstone
User status: Offline
|
ohh mate, iv had it same .. night mare :/ but not hard as it looks like  ) good luck mate
|
ArdenblueDan
Member
Registered: 23rd Aug 12
Location: Basildon
User status: Offline
|
Love these clios makes me miss mine lol
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Are you replacing with standard 2 piece valves or upgrading to 1 piece? If you prefer LY... Part ex?? 
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Keeping standards, If I were to keep it, I'd go all out on it, but as I'm selling it (to my mate), I'm only doing some minor power upgrades, 182 exhaust manifold, possibily 197 cams if I can talk him into them too.
|
Simon_16v
Member
Registered: 14th Aug 06
Location: Yorkshire
User status: Offline
|
What is needed to run 197 cams in the 182 head Alex?
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Need to set the timing differently, that's it really, it will need a remap, as it will run lumpy at idle and possibly be a bit lean.
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Do you know the degree difference you have to run with them Alex? There's a specialist around London that did all the research and keeping everything secret!
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
I don't, but I know somebody with the tool to do it (a bent standard horseshoe)
Theres a few people that know about it now, its not as well known as say a XE cam in a LET engine, but its not 20 years old either lol.
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Handy to know that!! You on the cliosport.net forum?
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
I am indeed, have threads over there for both this and my DCi sport rep.
Assume you are too?
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
I am, same user name. Almost anyway. Started a thread for mine but not updated it for ages.
[Edited on 20-09-2013 by Edges 58]
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
BIG update
First up, rebuild head. 16 new valves, skimmed, 6 new rockers, new valve stem seals, decoked and valves lapped in. Lifters drained too.
Block face cleaned up, pistons decoked etc.
Quality Payne gasket
Then a expensive box from Renault Wolvo appeared, this meant I could crack on with some more...
Like getting it all back together, timing done (With correct tools!)
Genuine plugs..
Really cracking on with it now
Few more bits..
Then completed! (Rail guard fitted 2mins after this pic!)
First start video too...
It ran a lot better after this vid, idled properly, revved properly and stopped tapping (that would have been due to no oil in lifters/Dephaser)
Took it for a drive, mostly okay, needs a couple of little bits..
Then took it for a mini photo shoot with Paris Peach, the 172 being driven by its new owner
Some of the pics are piss poor, camera can't deal with no light at all
Suits little Terry
Its now left my drive, With its new owner (Terry), and will be back for more stuff as per usual with the fleet of Clio's I care of!
I can confirm a K-tec Stealth sounds good too.
Will keep this thread up to date with progress since there is still more to come, and Terry already has plans!
|
