3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
Any point of these? Am building a new engine and wondering whether to bother or not?
Old engine didn't have one.
|
VrsTurbo
Premium Member
Registered: 8th Jun 10
User status: Offline
|
Stops the vapour going into the inlet so it does help.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
Adds to the tech spec sheet at car shows
|
monkeytwizzel
Member
Registered: 10th Aug 11
Location: Chard, Somerset
User status: Offline
|
Only if you will be doing alot of hard cornering or someones got your ring gap wrong.
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
Got it coming now. Will probably fit it as it gets rid of some shitty pipe work.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
Spec
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
Bought it with a Teves20 ABS system, so can ditch all the corrado stuff, its never worked.
|
P1CK4D
Member
Registered: 19th Jun 06
Location: Around Essex Somewhere
User status: Offline
|
How much was your oil catch tank? I bought a cheap ebay one for my Evo and it's worked a treat!
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
£100 2nd hand, Think its custom made/modified and includes custom mounting bracket and pipe, possibly a small K&N filter. Its black textured finish.
|
P1CK4D
Member
Registered: 19th Jun 06
Location: Around Essex Somewhere
User status: Offline
|
Jesus christ, £100
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
I know, Not sure if i've been ripped off or not
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
Its a 42 Draft designs one.
|
VrsTurbo
Premium Member
Registered: 8th Jun 10
User status: Offline
|
Mine cost 40 from eBay with AN fittings and internal baffles!
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
my mate made mine for a special fried ride from the chinese. true story. even machined up an AN fitting on the lathe for it in the deal. worked great although it never breathed heavy my engine actually.
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
I still wonder if i actually need it, engine will be 0miles. I do remember the air intake elbow getting quite oily inside.
|
Corsa_Sport21
Member
Registered: 13th Apr 08
Location: Leven, Fife. Drives : 205 GTi
User status: Offline
|
What's happened to the good old days of using an old plastic juice bottle with a bit of rubber hose going into it, with some duct tape to hold it in place.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
quote: Originally posted by Corsa_Sport21
What's happened to the good old days of using an old plastic juice bottle with a bit of rubber hose going into it, with some duct tape to hold it in place.
jed deleted his thread i think
|
andy_mk3
Member
Registered: 18th Dec 11
Location: Peterborough
User status: Offline
|
This is how it's done...
I just have mine venting to atmosphere though. Pipe comes off the rocker and down the back of the block.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
Seems to be a lot of 50p looking Saab conversions going about these days.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
They are worth having if you are going to drive on track.... oil pools in heads, sloshes about etc, and can get blown out breathers on occasion.
also worth having if you'd rather octane lowering oil vapours didnt go into the inlet and combustion
If you have it vented near the bulkhead - be prepared to have smelly air in the car. Possibly run a length of hose under the car rather than a wee K&N breather filter thing.
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
quote: Originally posted by Nic Barnes
Seems to be a lot of 50p looking Saab conversions going about these days.
i just fitted a breather to the engine where the pipe would come out, it can still breathe but no shite comes out
|