wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
Anyone had any problems with them and how did you overcome them?
I want to see i have have a similar problem or if i have created a new one!!!
P.S. mnie dont work and when the wiring was changed at the switch the wires started smoking + melting together!!!
Can have switch on all time - neons dont work
Switch as a switch - neons dont work
Other way of wiring and wires melt
any suggestions?
[Edited on 15-11-2003 by wee_kev]
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Either a short or a VERY bad problem with the transformer drawing loads of current and melting the wires.
[Edited on 15-11-2003 by AustinPXX]
|
kev_corsa
Member
Registered: 7th Nov 02
Location: Newport, Uni in Bristol
User status: Offline
|
hmmm looks like there aint a fuse there!
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
my mate tried about 10 different tube on his before he gave up, they kept blowing on some and the transformers were dodgy on others, he gave up in the end.
|
Fraudster
Member
Registered: 30th Oct 03
Location: London
User status: Offline
|
what make u got as i have had probs with some.
|
wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
Think its Max power. Bought them off my mate(still sealed in packaging).
Asked another mate to have a look and says its done wrong but thinks the neons might have blown.
Going to see what the deal is on wed, fingers crossed i dont have to buy more neons!!!!
[Edited on 16-11-2003 by wee_kev]
|
Fraudster
Member
Registered: 30th Oct 03
Location: London
User status: Offline
|
ere, i got them, there streetwize aint they. just been to the guys hse today where i got em? think mine is a power problem as i tried another 3 tubes, and found 1 that was fine then it started playing up again, only half lit 1 or 2 tube, the ones furthest away from the tranformer. is the prob ur having?
im getting the guy to speak to his tech guy tomorrow 2 sort a soloution.
|
caddog
Member
Registered: 8th Oct 03
Location: Tamnaherin Eglinton N.Ireland
User status: Offline
|
I have had the same prob in the wet where the furthest tube from the x-former was only 1/2 lit.... but only in the wet.... problem was condensation in the tube no no probs.... Streetwise/Max power kit.... Also dont run the neon wire close to the fuel pump as it affects them.... good connections r vital.... i got these stright through crimps which we use at work which have no insulation...... Crimped the neon wire, filled it with solder, self amalgamating tape, fiberglass tape and finally heat srink just to take no chances
|
Fraudster
Member
Registered: 30th Oct 03
Location: London
User status: Offline
|
aint being funny, but if im buying a set of neons, like i have, i want em all lit all the time. well, im waiting for an answer regarding why im having trouble, but if no one can help they can have them back, simple. aint wasting my money on shite equipment.
|
wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
Well today was not good. Nothing was connected for the neons but when i was out driving they started melting and had the most amount of smoke ever. Stopped the car(middle of road) hazards on, bonnet up and i see sparks . I have no tools or cloth to help me, I was rather worried. Evenually got them seperated and my dad came down with wire-cutters, cut it next to battery so had no chance of power. Due to the fuse being at wrong end of circuit there is a chance the neons have blown!!
I have cut + removed all connections, going to start again on Wednesday and hope the neons aint bust.
[Edited on 17-11-2003 by wee_kev]
[Edited on 17-11-2003 by wee_kev]
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Nah they are fucked mate and that is nothing more than full on dodgy wiring. Sorry.
|
Martin_C
Member
Registered: 27th Jun 03
Location: Ayrshire, Scotland
User status: Offline
|
the reply about fuel pumps...i ran the wires for mine close to the fuel pump, is that possibly why my speedo is going haywire?
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
LOL wierd people i have several cables zip clipped to my fuel lines and have done for a while with zero problems at all.
|
wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
Thats what i worried about(them being bust due to my mate's wiring).
Lets hope i get away with it and dont have to buy more!!!
|
wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
Looks like they are bust - gutted
if i want to buy new ones what the best type to get?
|
Fraudster
Member
Registered: 30th Oct 03
Location: London
User status: Offline
|
what was the prob u was having, in talk about getting mine sorted. cheers geezer
|
Corsa^Dan
Member
Registered: 4th Dec 02
Location: Sleaford, Lincolnshire
User status: Offline
|
where do u put the back 1?
|
Fraudster
Member
Registered: 30th Oct 03
Location: London
User status: Offline
|
at the mo, ive thrown mine on the rear axle, dont really do much, but until i get me kit on it will have to do. might get rid n e way soon, pissing me right orf
|
wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
I now have 3 out of the 4 working. Just the back one to sort.
It don't work at all, also one of the black boxes at the end rattles when you shake it, the tube looks fine tho. Any ideas?
[Edited on 08-12-2003 by wee_kev]
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
yeah, sounds like the starter for it is fucked, take it bk and get a replacement tube. as i said before my mate who used to work at an ice shop took him 10 kits to finally get some that worked.
|
Fraudster
Member
Registered: 30th Oct 03
Location: London
User status: Offline
|
ive swapped myt red set to a blur one for my new mg, so hopefully, these will work this time, what a pain in the arse.
|
wee_kev
Member
Registered: 6th Jan 03
Location: Aberdeen
User status: Offline
|
Do u guys think it would be ok to have 2 "glow job in a box" tubes from neoquip on my sides and move my current 2 max power tubes from the sides to the front and back.
Think you would notice a difference between the brands?
[Edited on 08-12-2003 by wee_kev]
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
yer and i think the transformers will be different
|
chadjpr
Member
Registered: 27th Dec 02
Location: Chesterfield
User status: Offline
|
ive bought some fusion neons recently (please say no) but has ne1 had any problems with these cos im about to fit them soon
|