stuarty
Member
Registered: 7th Jan 04
Location: Fife
User status: Offline
|
anyone know how the fans for the amps are wired up?
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Usually off a relay triggered via the remote lead.
|
Scotty_B
Member
Registered: 11th Jun 03
Location: East Kilbride
User status: Offline
|
Could you not just plug the yellow wire into the remote connector on the amp the red wire to the power and the black wire to the earth, so that it comes on when the amp does.
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
No as this would draw too much power on the remote lead and would damage the headunit.
Computer fans will either have a 4 pin connector (Which it only uses two of those wires) or a 3 pin connector which goes to motherboards.
On the 3 pin versions there are 3 wires, but the 3rd wire is for the RPM sensor.
Only way to run them is to connect the remote lead to the switch wire on the relay, so when the amp is on it switches on the relay giving power to the fans.
|
