corsa_paz
Member
Registered: 5th Mar 04
Location: Midlands
User status: Offline
|
wanna get my corsa_b lowered, but need to find out the offset 1st...
i aint got a clue. mine are Fox 3 in 16inch...
has any1 got these? or know where i can find out??
cheers
paz
|
Simon-SXi
Member
Registered: 19th Mar 04
Location: Bargoed, Caerphilly
User status: Offline
|
Usually stamped on the inside of the wheel take it off and have a look on the inside around the bolt pattern
|
Corsa E-Tec
Member
Registered: 4th Feb 04
Location: Stevenage Drives: Leon Cupra
User status: Offline
|
Apparently you have to measure inside the alloy from the center hub to the edge of the rim.
If it is like 40 mm/4cm = et40.
Dont hold this to me tho. this is what i heard.
|
Simon-SXi
Member
Registered: 19th Mar 04
Location: Bargoed, Caerphilly
User status: Offline
|
If they are fox they are probs about et40 or 35 sommit, yea thats how the off set is measure its the distance from the centre of ur hub to the edge of ur alloy
|
corsa_paz
Member
Registered: 5th Mar 04
Location: Midlands
User status: Offline
|
i see
so basically i havent got the correct wheel for my car, but will that make a difference if i lower it??
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
no you guys have got it wrong
it's the distance between the hub face and the centre line of the wheel.!
so the distance from mounting face to the outer width of the rim, less half of it's total width.
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
good description here. at the bottom..
http://www.tyresave.co.uk/fitment.html
|
Simon-SXi
Member
Registered: 19th Mar 04
Location: Bargoed, Caerphilly
User status: Offline
|
thats wat i ment was the inner edge had the same probs on my nova bout a set of fox alloys was told they were the rite offset had them and they were wrong but check u never know
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
it shud be stamped onto the face, if you take the wheel off you can see
|