ash_corsa
Member
Registered: 15th Apr 04
Location: Shrewsbury
User status: Offline
|
Alright Lads
I cant seem to get a decent radio signal on my corsa
ive checked the back of the stereo and all is sound, ive got a Pioneer DEH6500 HU and ive added a smaller Aluminium ariel
How easy is it to replace the whole thing for a decent quality one?
cheers
ash
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
i have the same problem, but on mine its because i disconnected the aerial booster inorder to stop the MFD display turning off.
|
ash_corsa
Member
Registered: 15th Apr 04
Location: Shrewsbury
User status: Offline
|
wheres the ariel booster mate?
i wanna keep the display on the dash
cheers
ash
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
its at the base of the aerial, but if u cut the wire to keep the display working it curts the power to the booster.
|
b0bby
Member
Registered: 16th Dec 03
Location: Stockport, Greater Manchester
User status: Offline
|
cant you find alternative power for the booster? :S just a thought
|
corsa-sxi
Member
Registered: 11th Jul 03
Location: Kingston upon Hull
User status: Offline
|
i have the pioneer 6500 and have same problem, i sometimes hear static in areas
|
Dom
Member
Registered: 13th Sep 03
User status: Offline
|
aye...if you look on the MFD pin coming out of the ISO block, you will see a black cable and this is what goes to the booster, so just chop the grey/red cable and not both of them, it should work then
although i just disconnected the remote lead from the ISO block, to save on chopping of cables, and my reception is perfect...although goes abit dodgy when i get into the countryside (but only in a few places).
|
ash_corsa
Member
Registered: 15th Apr 04
Location: Shrewsbury
User status: Offline
|
i havent cut any wires at all
all i have done is
Removed factory radio + cage
put new cage in
plugged everything in and dropped the cd player in
what am i doing wrong mate
sorry to mess u about but i aint got a clue!
cheers
ash
|
Dom
Member
Registered: 13th Sep 03
User status: Offline
|
then connect the remote lead to the ISO block (blue wire from HU to blue wire on car iso block) and that shall do the job - although your date wont show up, you will need to cut the grey/red wire (car side) on the iso block.
although, if still isnt doing anything, then it might not be the booster at fault
|