sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
These brakes: http://www.v-tuning.com/GM%2016V%20Brakes.htm
What cars do they come on?
And how much do you think a set it worth at the scrapies?
Also how much are v6 disks and calipers worth at the scrap yard?
Thanks, si
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
To be honest, if you have the cash buy them new...
|
sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
But i dont have the cash, Whats wrong with used ones?
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
get the calipers in the scrapy £20-£40 then buy new disks and pads
|
sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
Yeah the guy said £40 for v6 calipers so how much would disks and pads from vaux be approx?
Also what cars did 16v brakes come on?
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
v6 disks from vaux wouldnt fit cos there five stud. you can buy them from v-tuning.co.uk and they are genuine vauxhall parts especially drilled to fit a corsa.... there about £90 iirc check out there site all the prices are there.
£40 for just cailpers is a bit steap.
|
sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
Yeah this yard is mega expensive!
Are these the 16v calipers i need?:
A pair of ATE brake callipers from a Cavalier GSi. Same as units fitted to the Astra GTE 16v. Will fit directly to the MK2 and MK3 Astras as a brake upgrade on lower spec models. Will also fit the Nova and Corsa providing that 15" wheels or larger are fitted.
And could i buy 4 stud gm disks and pads for these? And it would all bolt right on?
Thanks, si
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
yeah there the 2litre 16v ones 256mm brilliant brakes.
for the extra few quid though i'd go with the v6 ones....284mm
look better behind yer alloys and have even more stoping power.
[Edited on 30-08-2004 by Siberia]
|
sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
Cheers mate thanks for ya help!
|