Diff
Member
Registered: 24th Oct 04
User status: Offline
|
It looks like its the clamp used to attach the back box to the rest of the system, i've looked in the max power haynes and its says to get a 'band clamp', anyone know if this is a decent solution or any other ideas, thanks
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
turn the clamp 90 degrees so the nuts face away from the axle this puts the thinnest part of the clam near the axle, if not undo the clamp and rotate the back box slighty and this will lift the pipe up away from the axle cos of the bend in it
|
Diff
Member
Registered: 24th Oct 04
User status: Offline
|
quality i'll give it ago thanks for your help greasemonkey
|
CorsAsh
Member
Registered: 19th Apr 02
Location: Munich
User status: Offline
|
quote:
Originally posted by Greasemonkey
turn the clamp 90 degrees so the nuts face away from the axle this puts the thinnest part of the clam near the axle, if not undo the clamp and rotate the back box slighty and this will lift the pipe up away from the axle cos of the bend in it
Couldn't have put it better myself 
|
dna23
Member
Registered: 1st Nov 04
Location: Northamptonshire
User status: Offline
|
lovely, i needed this advice to 
|
mrazrockit
Member
Registered: 25th Jan 05
Location: Greater London
User status: Offline
|
magic
|
C3 WLK
Member
Registered: 12th Nov 04
Location: Carlton, Bedfordshire
User status: Offline
|
If it is still of the rear axel a little get an old bike tyre and cut a 20 cm length and cable tie it to the rear beem.
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
Box off, hammer, box back on.
|
