purpleperil
Member
Registered: 27th Jul 05
User status: Offline
|
I'm sure this question has been asked a load of times
I'm after fitting some ProRace 1.2 alloys to my Corsa as follows
ET45 offset
195/45/16 tyres
Lowered approx 60mm on coilovers
The guy at Halfords reckons some arch mods may be required to fit.
Is this correct as my personal view is that no work should be required?
Cheers
|
Twiggy
Member
Registered: 15th Oct 04
User status: Offline
|
i wud think a quick trim wud be in order!
|
marklawton
Member
Registered: 24th Apr 05
Location: Pensby, Wirral Drives:Golf mk4 GTI
User status: Offline
|
ive got 16s on mine and the et is 45 lowered 60mm, i get scrubbage on the front only going over speed bumps, the rear only rubs if i have two people on the back, its fine with one person in the back, all iam going to do is cut all the bolts and screws off the arches which will solve the problem
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
can you get pro race alloys in 16's with a 45mm offset?
didnt think you could.
|
purpleperil
Member
Registered: 27th Jul 05
User status: Offline
|
The 1.2's come in 16inch at an offset of 45.
The Prorace 1's are the variety that only come in 17inch
|
craig8
Premium Member
Registered: 31st Dec 04
Location: Glasgow
User status: Offline
|
my 15" alloys are et49 and im lowered 60mm and mines still rubs with someone in the back
E36 328
|
