m1ke
Member
Registered: 9th Sep 05
Location: Tewkesbury
User status: Offline
|
ho do i remove the hazard light switch and the 2 air vents etc as i want the space to put my screen but can not get hazard ligth and vents out etc (corsa b by the way)
please reply with pictures (if you can)
many thanks
Mike
|
cougaruk
Member
Registered: 6th Sep 05
Location: Wickford Essex
User status: Offline
|
Mike
Just did mine this weekend, screen fitted working ok remove the slider knob, then remove the slider trim, you will find 2 screws there, the other 2 are hidden behind the air vents, pull down on one of the air vents, put a screw driver on the top of the vent and apply a small amount of force it will drop down a couple of inches...using a longish screw driver remove the screw, do the same with the other vent, i then glassed up the hole left at the back of the vents, or you will heat up the screen.... hazard light switch has a tab on the top just press it down and remove. sorry aint got pics to remove items
|
m1ke
Member
Registered: 9th Sep 05
Location: Tewkesbury
User status: Offline
|
thanks alot wil try it soon see if i can do it, any else got any pics ?
|
MarkW
Member
Registered: 19th Mar 04
Location: Orpington, Kent
User status: Offline
|
best off getting a haynes manual as its a tricky job
|
cougaruk
Member
Registered: 6th Sep 05
Location: Wickford Essex
User status: Offline
|
Yeah Mark a haynes manual will tell him how to do it....i didnt know those screws were behind the vents trim i got a manual
Here's how its turning out Mike
[Edited on 09-11-2005 by cougaruk]
|