Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Air mass meter ?
ICV ?
Throttle Body ?
Whats the blue and brown wires ? I have the connector to go with them ?
Air mass meter ?
The pipe above the wires with the clip on it ? Heater matrix ?
Idle control valve / motor should be here ?
Sorry to be a pain on the arse just need to know what needs ordered etc 
Going to get it all stripped down next weekend.
Cheers
Gregor
Its an x16xe btw
[Edited on 19-02-2006 by escortgti.com]
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
the rest of the car?
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Hmm not one of your best 
|
TNM
Member
Registered: 5th Apr 04
Location: Nottingham Drives: VW Tiguan
User status: Offline
|
was it hacked out?
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
possibly
|
VegasPhil
Premium Member
Registered: 16th Jan 05
Location: Fareham, Hants Drives: Octavia VRS
User status: Offline
|
Putting it in the Red one?
Corsa 2.0 16v Vegas - Sold
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
the brown and blue wires are for the coolant temp sensor...
its hard to see if the trottle boddie is missing cos your pics are blurred... but if it is then the ICV is attatched to it so that will be missing...
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
Its an x16 xe... doesn't have an air mass meter
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Yep sorry , looking at the haynes manual its a c16xe so thats where Im getting ideas from.
Yep going in the red corsa
ICV / Throttle body expensive ?
[Edited on 20-02-2006 by escortgti.com]
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
looks like the throttle body is there, but the piping that goes to the air filter has been butchered. the icv is attatched to the throttle body.
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
speak to robin about the piping and other bits a bobs, user name robmarriott
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
blue and brown wires are for the cts, you will need a manifold of course and a map sensor. check if the knock sensor is there (bolts into the back of the block between cylinders 2&3)
if you need any bits, i probably have them spare.
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Got the manifold and sensor,
Not sure what the knock sensor looks like ?
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
4th pic - coolant temp sensor, sho9uld be a blue plug attached to the end of those wires, looks like they literally ripped the sensor out...
tbh would need better pics for others...
icv is also connected to the throttlebody, so will be with that
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
I have that plug with it paul 
Whats this I'm missing , which is on Rob B's engine ?
Will get better pics
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
you mean the bit above the alternator?? thats the tb, as he has a dbillas inlet, its moved from the otherside!
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Sorry mate I'm a total novice.
Bit above alternator with gold pipe,
You have any good pics of a standard x16xe ?
Cheers
Gregor
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
ahhh right the bit above the alternator is the throttlebody, on your engine, it is to the right of the engine (other side to rob's engine) and is attached to the big cast alloy inlet manifold on the top of the engine!
pics of my X16XE can be found in my garage, or more pics can be found here
http://www.corsa-b.co.uk/album_cat.php?cat_id=17&user_id=2
probably not quite as detailed as you want though... sorry!
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
K so I have that then,
What about the air box where Im being told its butchered ? Whats missing there?
Thanks a lot for the help
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
cant reemember the name of it, but there is a sensor missing there, plumbs into the inlet just after the filter (you can see it on pics of my engine)
if you can, try get some better pics & can have a proper butchers at it as im off out now
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Will do,
Cheers
|
corsa_godfather
Member
Registered: 6th May 03
Location: Greenock,Scotland
User status: Offline
|
aye the throttle body on robs engine is above the alternator as he had dbilas fitted.
your throttle body will be on the right hand side of the engine looking at it from the front.
the inlet pipe the goes from the air box to the throttle body isnt there is it?big plastic tube goes round the back of the engine?
the sensor that plugs into the inlet pipe is the air flow sensor is it not?
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Big plastic tube going down the back is there
Still not sure about the throttle body , unsure what it looks like ....
|
