vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
Ok. I have an Astra GTE digital dash to be fitted to my corsa:
It has the white and black plug on the backs of the dash, with an assortment of wires differing in colour.
White Plug:
Black Plug:
Basically, i would very much appreciate it if anyone could tell me the wires from these plugs that i will need to use (i.e. i will know which wires i can then forget about). In addition the back of my clocks in the car at the minute look like this:
Has anyone done this GTE dash transfer into their corsa before? If so could you shed some light on the wiring technique/process, or let me know of anyone who has or the whereabouts to information about the dash change. I have read through the tutorial on the site but found it to be quite general and of little use.
Any fresh advice/direction would be mucho appreciated. Thanks. 
[Edited on 19-09-2006 by vx.racing]
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
Anyone...
|
corsaggh
Member
Registered: 28th Feb 05
Location: Bristol
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=35952
that should cover everything
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
quote:
Originally posted by vx.racing
I have read through the tutorial on the site but found it to be quite general and of little use.
[Edited on 20-09-2006 by vx.racing]
[Edited on 20-09-2006 by vx.racing]
|
