paulc
Member
Registered: 12th Oct 06
User status: Offline
|
Im trying to replace the bulbs in my heater control panel, ive got a haynes manual but its incorrect , it tell me the bulbs are held in place by clips on a strip at the rear , and simply unclip , this is incorrect on my 1999 1.0
It looks like i need to go in from the front , so I need to remove the control knobs ,
Ive got the centre rear wind screen heater knob off , but what about the outside 2?
Haynes says pull them off , but they are solid !!!!!
any help be appreciated
Cheers
|
RobHayes
Member
Registered: 6th Sep 03
Location: Lincolnshire
User status: Offline
|
pull harder. simple as that
|
paulc
Member
Registered: 12th Oct 06
User status: Offline
|
cheers Rob
i found this
http://www.corsasport.co.uk/board/viewthread.php?tid=102379
looks like the haynes didnt bother to check their info on later models
|
paulc
Member
Registered: 12th Oct 06
User status: Offline
|
does anyone know if the heater centre switch bulb can be replaced , VX told me its sealed in the switch
|
paulc
Member
Registered: 12th Oct 06
User status: Offline
|
sorted !!!!!
its not to bad of a job , i cansee why it easier onearlier models , as once the heater unit is out you replace them then ,
The new model has the bulbs attached to the centre switch , so you have to remove the vent clips , and it falls apart literally lol
then the bulbs can be easily replaced from the front
all lights up now , yippe , apart from the rear windscreen on bulb as this is part of the whole switch , so you would need a compelte new switch from VX probably alot more than 26p for a bulb lol
|