ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
thats it decision has been made, all of its goto go!! ppl who have contacted me about parts i will get in touch, i want it all gone as soon as possible so i can buy a new car.. tell me what u want and i will be in touch!! cheers
right so far it goes like this,
quickshift linkage £25 sold to Adam-d
compbrake eccentric top mounts £70,
bushes/wishbones/joints ect £100,
lower strut brace £20,
Braided fuel lines £40,
Braided brake lines £100,
strengthened and lowered tie bar brackets and tie bars £40 all provisionaly sold to Beardy.
sparco roll cage provisionaly sold
there is people interested in some other parts so be quick to get your name down for first refusal, be sure to have the money if you want first refusal as it is all to be sold as soon as possible.
extra things i have thought of are
(for x/c-14/16-xe/xel)
cool running thermostac new £25
kn racing 10mm quad core race leads £30
SBD alloy cambelt idler pulleys, just been fitted with new bearings, some marks on one pulley but runs perfectly true and will not affect performance/reliability £50
air bag steering collumn and non-power steering rack with mountings with full lock set and 2 keys (no boot lock)£30
doors good condition £20 each
bonnet which has had the grill area filled in and smoothed, crack starting to come through but can easily be sorted £20
corsa gsi clock 88k miles on them £25
corsa gsi fuel tank with fuel pump and all fuel lines £30
new pollen filter/fuel filter/oil filter £5
all door/boot/bonnet rubbers £10
2x carbon fibre/kevlar tubes, was going to use them to make up strut braces, very light and strong, £10 each
corsa gsi front hubs fitted with bolt to stud conversion and rear stud conversion £60 the lot delivered
full spare set of c16xe sensors/loom/manifolds/airflow meters ect ect £offers
de-cat pipe with downpipe, to fit either c16xe or x16xe or x14xe corsa £25
cat with downpipe to fit either c16xe or x16xe or x14xe £40
c16xe block, crank, pistons, rods, oil pump, sump £20
mint 59k x14xe bottom end, £40
c20xe cream injectors and fuel rail £15
corsa gsi power steering pump couple months old still looks new £10
complete heater assembly (matrix with fan and all cables/enclosure) £20
headlights £10 the pair
very recent new gsi master cylinder & servo £20
windows £5 each
pipercross viper £80
omp steering wheel (no boss) £70
nova 22spline driveshaft (o/s long) £10
i will take £400 on the corbeau revolution seats in good condition!!
i think 3 maybe 4 point harness sparco black £15
for the minute thats all i can think of, i do have lots more stuff just ask if u need or want anything.
i've had enough now and want a change, i doubt very much that i will finish the car, so i've posted this up to see how much interest i would get if i were to split and sell everything seperatly. depending on how much interest i get would be the deciding factor to if and when i sell everything. if there is something that you would want to buy let me know and when you would want it, this way i can see whens the best time to start stripping it and so i know who wants what, whoever puts their name down first gets first refusel if it falls through then it will be offered to the next person that asked for it...
all prices are as a guide, some things i am not sure how much there worth so make an offer, would sell the lot together if the price was right...
N-reg corsa Gsi smoke grey shell (with doors/boot/bonnet/glass/wings) (88k) has been fitted with 3mm strengthening plates (bought from teddytopend on here), front end completely seam welded, inside of car completely seam welded, but not yet seam welded the underside of the shell.. £???
Just Novas @ Corsa's poly bush kit replacing every piece of rubber on the car and brand new front wishbones, brand new ball joints and track rod ends £100
Sparco FIA approved multi point bolt in roll cage £300
sparco alloy front upper strut brace £50
Sparco steel front lower strut brace.
KW variant 1 coilover kit £280
Compbrake alloy eccentric top mounts £70
tie bar brackets, strengthened and lowered 20mm £40
rear gsi anti roll bars x2 £5 each
front gsi anti roll bar £10
wheel bolt to stud conversion £30
vectra 288mm v6 front brakes new discs re-drilled to 4 stud with custom spigot rings, almost new pads, and freshly painted silver calipers and brackets. ready to fit to any corsa £120
OZ Superturismo WRC 15" et36 alloy wheels x5. 1 brand new with new tyre, 2 with good yoko a539's, and 2 with threads showing lol. wheels arent amazing condition but good, look to have been touched up with tipex where they have been curbed £250
complete goodridge stainless steel braided brake lines to re-place all copper line on the car. £100
stainless steel braided fuel lines £40
OMP suade steering wheel £70
corbeau revolution kevlar/grp & carbon/kevlar seats £???
rally design quickshift linkage £25
c16xe engine looks to have been re-built aprox 30k ago, very very clean under rocker cover and in sump.. complete with everything to run, i.e loom/ecu/sensors/manifold ect £200
sbd alloy cambelt idler rollers (few marks but will not affect them) £60
kn racing 10mm race leads £??
custom made 2-1/8" exhaust system with quil stainless motorbike race end can & de-cat £120
face lift black dashboard £15
gsi 22spline driveshafts £60
complete gsi wiring loom £50
gsi spoiler £30
rear beam £30
gsi front bumper with fogs £160
i do have more stuff so let me know what u need n i will see what i can do...
chris
here are the pics!!!
[Edited on 09-11-2006 by ckallis500]
[Edited on 09-11-2006 by ckallis500]
[Edited on 14-11-2006 by ckallis500]
[Edited on 14-11-2006 by ckallis500]
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
u2u'd 
|
j7 gkk
Member
Registered: 16th Jun 05
Location: Sheffield
User status: Offline
|
are the front brakes just normal discs matey, will the leads fit a x14xe? and are the sbd rollers new?
[Edited on 07-11-2006 by j7 gkk]
[Edited on 07-11-2006 by j7 gkk]
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
u2u'd
|
P1CK4D
Member
Registered: 19th Jun 06
Location: Around Essex Somewhere
User status: Offline
|
u2u'd matey
|
birchieboy
Member
Registered: 18th Jan 06
User status: Offline
|
u2u'd
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
the front brakes consist of new 288mm v6 discs (plain, not drilled or grooved) custom spigot rings, good v6 pads, v6 calipers and brackets freshly painted silver. leads will fit 14xe, rollers r new with new bearings, but have a couple marks on it, either from being dropped, or sum plonker tryin to hammer the bearing in, but all is fine, will defo not affect the running of the engine...
quote:
Originally posted by j7 gkk
are the front brakes just normal discs matey, will the leads fit a x14xe? and are the sbd rollers new?
[Edited on 07-11-2006 by j7 gkk]
[Edited on 07-11-2006 by j7 gkk]
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
better pics of the quickshift?
Leads £10?
Rob
|
Mattb
Member
Registered: 2nd Feb 03
Location: Under your sisters bed
User status: Offline
|
Those seats are easily worth £400 the pair 
|
mantamark
Member
Registered: 19th Jun 06
Location: Northumberland
User status: Offline
|
I will have...
Just Novas @ Corsa's poly bush kit replacing every piece of rubber on the car and brand new front wishbones, brand new ball joints and track rod ends £100
Sparco steel front lower strut brace - price?
price inc postage please.
|
aid03
Member
Registered: 21st Aug 06
Location: aberdeen
User status: Offline
|
hi mate howz much 4 the viper induction kit???
|
John G
Member
Registered: 18th Jul 05
Location: Wirral, Merseyside
User status: Offline
|
bump for the great prices that cage is mint for 300
flick of paint and ud be away
|
Nicklin
Member
Registered: 31st Oct 05
Location: Sandbach, Cheshire
User status: Offline
|
how much for the front lower strut brace?
|
Sandsy
Member
Registered: 29th Oct 04
Location: Tilney All Saints Drives: V6 Corsa
User status: Offline
|
how much for the semi smooth boot and spoiler also do you have a standard rear bumper
|
M6RKK
Member
Registered: 21st Jan 06
Location: Glasgow
User status: Offline
|
Just Novas @ Corsa's poly bush kit replacing every piece of rubber on the car and brand new front wishbones, brand new ball joints and track rod ends £100
and lower ARB ?
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
boot and spoiler £40 it needs tidying up tho.. offers on the viper.
lower strut brace £20
quite a few ppl want things so will put a list up in abit. chris
|
mantamark
Member
Registered: 19th Jun 06
Location: Northumberland
User status: Offline
|
£150 for Just Novas @ Corsa's poly bush kit replacing every piece of rubber on the car and brand new front wishbones, brand new ball joints and track rod ends ,
lower ARB
Viper?
+ postage, whatever that is?
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
TTT
|
aid03
Member
Registered: 21st Aug 06
Location: aberdeen
User status: Offline
|
u2u'd
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
right so far it goes like this,
quickshift linkage £25 still for sale... jr i think was next on the list
compbrake eccentric top mounts £70,
bushes/wishbones/joints ect £100,
lower strut brace £20,
Braided fuel lines £40,
Braided brake lines £100,
strengthened and lowered tie bar brackets and tie bars £40 all provisionaly sold to Beardy.
sparco roll cage provisionaly sold to d128mat
there is people interested in some other parts so be quick to get your name down for first refusal, be sure to have the money if you want first refusal as it is all to be sold as soon as possible.
extra things i have thought of are
(for x/c-14/16-xe/xel)
cool running thermostac new £25
kn racing 10mm quad core race leads £30
SBD alloy cambelt idler pulleys, just been fitted with new bearings, some marks on one pulley but runs perfectly true and will not affect performance/reliability £50
air bag steering collumn and non-power steering rack with mountings with full lock set and 2 keys (no boot lock)£30
doors good condition £20 each
bonnet which has had the grill area filled in and smoothed, crack starting to come through but can easily be sorted £20
corsa gsi clock 88k miles on them £25
corsa gsi fuel tank with fuel pump and all fuel lines £30
new pollen filter/fuel filter/oil filter £5
all door/boot/bonnet rubbers £10
2x carbon fibre/kevlar tubes, was going to use them to make up strut braces, very light and strong, £10 each
corsa gsi front hubs fitted with bolt to stud conversion and rear stud conversion £60 the lot delivered
full spare set of c16xe sensors/loom/manifolds/airflow meters ect ect £offers
de-cat pipe with downpipe, to fit either c16xe or x16xe or x14xe corsa £25
cat with downpipe to fit either c16xe or x16xe or x14xe £40
c16xe block, crank, pistons, rods, oil pump, sump £20
mint 59k x14xe bottom end, £40
c20xe cream injectors and fuel rail £15
corsa gsi power steering pump couple months old still looks new £10
complete heater assembly (matrix with fan and all cables/enclosure) £20
headlights £10 the pair
very recent new gsi master cylinder & servo £20
windows £5 each
pipercross viper £80
omp steering wheel (no boss) £70
nova 22spline driveshaft (o/s long) £10
i will take £400 on the corbeau revolution seats in good condition!!
i think 3 maybe 4 point harness sparco black £15
for the minute thats all i can think of, i do have lots more stuff just ask if u need or want anything.
[Edited on 09-11-2006 by ckallis500]
[Edited on 14-11-2006 by ckallis500]
[Edited on 14-11-2006 by ckallis500]
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
u2u'd
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
c/x-14/16-xe/xel fuel rail's £5 each
f13wr gearbox 80k no noise's (in my opinion this is the best box for a 1.6 16v)£20
x14xe and x16xel heads, both have bent valves £5each
corsa gsi matched inlet/exhaust cams £5 pair.
14/16xe flat type flywheel, loads lighter than the normal gsi flywheel with new clutch (most 5k miles) and spare new clutch plate £30
c16xe pistons/con-rods x7 but good and usable £10 takes em all
brand new c16xe/x16xe con-rods £25
|
jimbo_247
Member
Registered: 22nd Feb 06
Location: Bucks
User status: Offline
|
any pics of the gsi front bumper with fog lights?
|
ckallis500
Member
Registered: 14th Dec 04
Location: plymouth
User status: Offline
|
here are some more pics
the pic above is of the head on the c16xe engine, below is a pic of the 59k mile head, you can see how much cleaner the c16xe head is, from this i can be sure it is very very low mileage as well as looking inside the sump..
|
sinnerboy
Member
Registered: 31st Jan 06
User status: Offline
|
Any chance of getting the rear L bit off both skirts? 
Also would you post to Ireland?
|
