Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Sold my Corsa GSi now, but have a load of excellent condition spares left over.
I recently broke a X16XE engine for bits for my car. I still have:
Oil Cap - perfect for painting - £5
Rocker Cover - perfect for polishing/powdercoating - £20
Sump - oil pick up pipe if req'd - Excellent condition - £10
Block - Excellent condition - just had professional hone - £40
Cylinder Head - Excellent condition - fully stripped for inspection but all valves etc supplied and in perfect order - £30
16v header tank - twin inlet at the top - £10
Exhaust manifold and lambda sensor - no down pipe £10
Crank position sensor and bracket - £5
Engine bay wiring loom - excellent working order - £20
Starter/Charge loom - excellent working order - £10
Flywheel & used clutch if reg'd - excelent working order - £20
Inlet manifold - Top and Bottom parts - ideal for Mantzel etc - £25
Fuel rail and injectors - excellent working order - £15
Throttle body - excellent condition - just been cleaned - £15
EGR Valve - only a couple of months use - like new £15
Coil pack - excellent working order - £10
Brand new gasket set - £30
Loads of other bits and bobs - u2u me if you need anything.
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
bump
|
Chris_87
Member
Registered: 3rd Jan 06
Location: Darlington
User status: Offline
|
Elo mate,
Just wondered if your loom would fit a 1400 sport engine?
Chris.
|
Ben GSi16v
Member
Registered: 29th Jul 03
Location: Bristol
User status: Offline
|
Yes it will mate
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Chris_87 you have PM! Cheers Ben GSi16v!!
|
Chris_87
Member
Registered: 3rd Jan 06
Location: Darlington
User status: Offline
|
Cheers Ben for the advice pal, and Chris I've PM'ed you back
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
bttt
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
bump
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
back up!
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Slight edit - Crank sensor sold.
Oil Cap - perfect for painting - £5
Rocker Cover - perfect for polishing/powdercoating - £20
Sump - oil pick up pipe if req'd - Excellent condition - £10
Block - Excellent condition - just had professional hone - £40
Cylinder Head - Excellent condition - fully stripped for inspection but all valves etc supplied and in perfect order - £30
16v header tank - twin inlet at the top - £10
Exhaust manifold and lambda sensor - no down pipe £10
Engine bay wiring loom - excellent working order - £20
Starter/Charge loom - excellent working order - £10
Flywheel & used clutch if reg'd - excelent working order - £20
Inlet manifold - Top and Bottom parts - ideal for Mantzel etc - £25
Fuel rail and injectors - excellent working order - £15
Throttle body - excellent condition - just been cleaned - £15
EGR Valve - only a couple of months use - like new £15
Coil pack - excellent working order - £10
Brand new gasket set - £30
[Edited on 21-11-2006 by Geordie-Chris]
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Another Edit - Both looms sold
Still have:
Oil Cap - perfect for painting - £5
Rocker Cover - perfect for polishing/powdercoating - £20
Sump - oil pick up pipe if req'd - Excellent condition - £10
Block - Excellent condition - just had professional hone - £40
Cylinder Head - Excellent condition - fully stripped for inspection but all valves etc supplied and in perfect order - £30
16v header tank - twin inlet at the top - £10
Exhaust manifold and lambda sensor - no down pipe £10
Flywheel & used clutch if reg'd - excelent working order - £20
Inlet manifold - Top and Bottom parts - ideal for Mantzel etc - £25
Fuel rail and injectors - excellent working order - £15
Throttle body - excellent condition - just been cleaned - £15
EGR Valve - only a couple of months use - like new £15
Coil pack - excellent working order - £10
Brand new gasket set - £30
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Still got loads of bits, u2u me with any offers on anything - need rid of it all, taking up space!
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Bump for the weekend - offers anyone???
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
BTTT
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Bump, some bits under offer but no payments yet!!
|
Kerry
Member
Registered: 5th Oct 01
Location: Norwich
User status: Offline
|
u2u sent
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
Replied
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
UPDATE - STILL HAVE:
Still have:
Oil Cap - perfect for painting - £5
Rocker Cover - perfect for polishing/powdercoating - £20
Sump - oil pick up pipe if req'd - Excellent condition - £10
Block - Excellent condition - just had professional hone - £40
Cylinder Head - Excellent condition - fully stripped for inspection but all valves etc supplied and in perfect order - £30
16v header tank - twin inlet at the top - £10
Exhaust manifold and lambda sensor - no down pipe £10
Flywheel & used clutch if reg'd - excelent working order - £20
Inlet manifold - Top and Bottom parts - ideal for Mantzel etc - £25
Fuel rail and injectors - excellent working order - £15
Throttle body - excellent condition - just been cleaned - £15
EGR Valve - only a couple of months use - like new £15
Brand new gasket set - £30
U2U me if your interested in anything.
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
OK - Sump, Inlet manifold, coil pack, throttle body, gaasket set, fuel rail and injectors now sold!
EDITED LIST BELOW!!
Oil Cap - perfect for painting - £5
Rocker Cover - perfect for polishing/powdercoating - £20
Block - Excellent condition - just had professional hone - £40
Cylinder Head - Excellent condition - fully stripped for inspection but all valves etc supplied and in perfect order - £30
16v header tank - twin inlet at the top - £10
Exhaust manifold and lambda sensor - no down pipe £10
Flywheel & used clutch if reg'd - excelent working order - £20
EGR Valve - only a couple of months use - like new £15
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
BTTT, not much left now!
|
j7 gkk
Member
Registered: 16th Jun 05
Location: Sheffield
User status: Offline
|
have you got the air intake pipe that goes round the back of the engine? from the throttle body to the airbox
cheers
|
stu60
Member
Registered: 30th Nov 05
Location: Edinburgh
User status: Offline
|
how many miles the cylinder head done ?
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
quote: Originally posted by j7 gkk
have you got the air intake pipe that goes round the back of the engine? from the throttle body to the airbox
cheers
No mate, it had a hole in it so it got binned!
quote: Originally posted by stu60
how many miles the cylinder head done ?
about 70,000 as far as I know - but its in a mates garage and I'm having serious trouble getting hold of him at the moment, so its temporarilly not for sale - sorry! If/when I get it back I'll u2u you!
|
stu60
Member
Registered: 30th Nov 05
Location: Edinburgh
User status: Offline
|
okay cool
|
Geordie-Chris
Member
Registered: 10th Nov 06
Location: Newcastle upon Tyne
User status: Offline
|
BTTT
|