Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
Just seeing if anyone would be interested in these. As i dont think i'll get round to using them.
Basically its:
A set of Yamaha R1 2001 5jj Bike carbs, all butterflys open fine, choke linkage works fine, the diaphram covers aren't split etc etc. All sound. In good condition, complete with intake trumpets, and rubber sleeves to join them to the inlet
And an Alloy Inlet manifold, made to suit a c/x14/16xe. Doesn't have connection for brake servo etc as the inlet was made for rally/autograss cars, but easy to put on yourself.
Im after £240 INCLUDING delivery. Which is a fair offer seeing as some inlets go for £180 alone.
PM me for more info.
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
U2Us replied to
Pics as requested:
[Edited on 17-12-2007 by Vaux Lad]
|
cfuk
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 2nd Jan 07
Location: Wigan
User status: Offline
|
do these take loads to set up right?
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
According to bogg bros no.
Just change the main jet to a larger one.
And then adjust the idle mix.
Phone them for more info, as they have experience with setting them up on a lot of different engines.
|
j_man
Member
Registered: 12th Aug 06
Location: Woolston, Cheshire
User status: Offline
|
what about management ??
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
What about it?
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
What do you use? Standard or aftermarket?
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
Aftermarket.
But thats for another thread
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
what about the water pipe thats on the standard inlet. what do you do with that.
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
If you want to use the heater system.
Drill and tap the flange to take a coolant union.
Use a inlet gasket as a guide.
Simple as that
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
Bttt
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
quote: Originally posted by andyc1234
what about the water pipe thats on the standard inlet. what do you do with that.
Don't use it. I haven't with my Mantzel....
TTT
|