Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
well as the title says i went to see a gsi with a xe in it..
all went well and i will be picking up the keys to it next saturday..
only thing is there are a few lil problems with it..
1 : NSF wing is rotting (could be totaly fooked) so needs a new one
2 : all the body kit is comming off (expecting this with a M reg car so needs bonding back on)
3 : front cross member where the vin badge goes has a fair bit of surface rust so will need stripping back and re spraying,
4 : needs a new ns door mirror.
5 : front bumper needs to be put back on propperly as the guy selling the car said when he put the new f20 in he didnt secure that side of the bumper properly just a clip needs putting in... we will see
6 : needs a new rear bumper as the one on there aint the right one for the car... need to sause one.
7 : needs the tailgait looking at.. round the rear wiper is rotting... am going to strip it back see what needs doing (most prolly fill it with JB autoweld or some form of liquid metal, fill, prime, spray shouldnt be to bad)
8 : interior is a lil tatty but expected from a 100,000 mile car, so need to sause a set of cally leathers for it..
9 : just sort out small genrelised rust patches....
10 : need to place the ecu in the footwell and not under the stearing coloum where it is now... nice easy job.
cars Caribic Blue so anyone got a ns wing mirror (manual type) or a nsf wing.. and a osf jacking cover i will be very interested!! also if anyones got a tailgait i will be interested too
Rich
(oh engines sweet as a nut, no smoke at all, and the typical rattle is there so lifers will be needed..)
|
Dione J
Member
Registered: 22nd Sep 04
Location: West Midlands Drives: Leon Cupra Turbo
User status: Offline
|
sounds like a project Hope you got it at a decent price under 1K
|
Rob R
Member
Registered: 31st May 03
Location: Kent
User status: Offline
|
sounds like a dog tbh why not spend the money you would fixing it up on gettign a decent example?
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
all the thins needed to fix it up are relatively cheap and easyish to do.. so im going to do the lot
even all the spraying which will be fun.
i have got my GLS still so thats my week car and this is going to be my project car..... when im done it will be a nice looking car.. just needs a bit of tlc to get it to its best,
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
just wondering is this the bit that the vin plate sits on?
|
Graham88
Member
Registered: 16th Apr 07
Location: South East Kent Drives: E46 M3
User status: Offline
|
Tailgate is a bitch to change over.
And yeah that looks like it
Pics of car tbh
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
tail gait aint going to be to hard to change, just needs 2 peeps and some towls to stop it getting scratrched.
will get some pics when i pick it up.. im gona start a thread in the projects bit so they will all be in there
|
Superlite Ltd.
Member
Registered: 9th Jan 07
User status: Offline
|
Sounds fucked lol
Yes, that the front panel or slam panel. Sold a couple here, they do rot. Even worse on the nova.
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
should be easy to replace... just looks like it got a few bolts and some kind of bondo holding it on...
|
Graeme
Premium Member
Registered: 26th Jul 04
Location: Northampton
User status: Offline
|
quote: Originally posted by Richardhhha
should be easy to replace... just looks like it got a few bolts and some kind of bondo holding it on...
there spot welded on, easy job if you hae a spot welder and a mig.
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
might have to see my mate about that then.
|
Graham88
Member
Registered: 16th Apr 07
Location: South East Kent Drives: E46 M3
User status: Offline
|
quote: Originally posted by Richardhhha
tail gait aint going to be to hard to change, just needs 2 peeps and some towls to stop it getting scratrched.
Have you seen the boot lock, that's what scares me at the moment as I'm meant to be changing mine over to a non rusty one
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
ah aint gona be to complecatd. i work for peugeot so nothing is going to be as complecated as workiung on one of them shiiters
|