mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
hi can anyone tell me how to put the digi dash in i've looked on here but the file is missing for the wiring.
Thanks
|
Rybo
Member
Registered: 6th Mar 08
Location: Cumbria
User status: Offline
|
first of all what corsa is it your putting it in?
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
its going in a 1.2 breeze pal but has x16xe in
[Edited on 23-03-2008 by mcswfc]
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
I fitted one to my Corsa and made up this wiring diagram so this should help you out -
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
your a star. did everything work ok aswell?
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
also have probs with my standed speedo it stopped working but if i have the same probs when digi is in caqn anyone help me out on the prob. i'm changed the sensor but still got the same. gonna start the digi dash in 10mins wish me luck lol
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
that table is no good for me lol different wire colours on the corsa side can anyone help?
|
snottysnowy1
Member
Registered: 15th Mar 04
Location: Durham, County Durham
User status: Offline
|
http://corsasport.co.uk/board/viewthread.php?tid=35929
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
i've looked on there pal but it says See attached file but there ant one.
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
anyone got any ideas??
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
Colours shouldn't be different mate. Check everything 100% and make sure.
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
well some of the colours are diff.... some have diff colour trace on them
[Edited on 23-03-2008 by mcswfc]
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
i have my wire colours if someone can match my colours to the gte digi colours
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
thiis my wire colours i'll do it up as a table and if someone can match them for me that would be nice this is from left to right top to bottom as it side in me dash
top row, left to right...
2 brown / blue not sure witch it trace -
1 green -
2 brown -
1 white -
1 black with blue trace -
1 black with white trace -
1 black -
1 gray or white with black trace -
bottom row left to right
1 blue with black trace -
1 blue with white trace -
1 brown with white trace -
1 black -
1 blue with green trace -
1 blue -
1 blue with red trace -
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
anyone know??
|
Rybo
Member
Registered: 6th Mar 08
Location: Cumbria
User status: Offline
|
ill try get a pic up for you,you dont use all the digidash ones
green to green-rev counter
brown-theres a few browns on the digi dash-jion them all together with you corsa ones-earth
black-theres a few of these too-also join them all together-ignition live
i would do that with then plug the digi dash in...it should power up with the ignition (this gives you a chance to check its all working)
blue/white to blue/white -battery warnig light
blue to blue-temp i think
the black with white trace is a switch earth for the indicators-note that your corsa clocks have one light for the indicators-digi dash has seperate left and right...you need to tape up the old feed and take new feed for left and right off your indicator stalk
its been about a year since i last put one in so ill go into garage in the morning and have a gander at the parts etc ive got and try get you some more info,if you fancy the two hour drive head up and ill do it for you...this may be enough to get you going but ill say this...you will have wires left at the end of it lol!
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
thanks well i think i'm gonna pop to vauxhall 2moz see if they can help me aswell but that would be nice if you could give me some more info!!
|
Rybo
Member
Registered: 6th Mar 08
Location: Cumbria
User status: Offline
|
ive u2u'd you mate
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
i've got half of the dash wired up but having little probs fitting it... i've cut all the plastic from the back of the dials lol
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
is it just one wire for the transducer to the digi dash as i didn't have no speedo workin on ma standed clocks so i was gonna take a feed from the transducer to the dash and of so what colours from the transducer to the dash??
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
The speedo wire is red and blue.
The transducer should also have a black live and a brown earth.
[Edited on 24-03-2008 by vx.racing]
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
right so what are the other 2 wires for on the transducer?? as theres 3 ant there??
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
what do i do with them just leave them and just take a feed from the other??
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
You need to connect all 3 on the transducer to those on the dash.
|
mcswfc
Member
Registered: 22nd Mar 08
Location: sheffield
User status: Offline
|
so just connect the black to the black and brown to brown on the digi then the other one to the blue with red trace ?
[Edited on 24-03-2008 by mcswfc]
|
