lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
What did you use to get the pins out? 
One comes out easily (top one) but the bottom one isn't budging 
|
Planty02
Member
Registered: 5th Mar 05
Location: Burslem, Stoke-on-Trent
User status: Offline
|
IIRC I used a screwdriver and hammer....when you have one out you need to make sure the door is properly supported otherwise the remaining pin will have loads of strain on it and be more difficult to remove 
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
Cheers mate
|
bieransri
Member
Registered: 13th Apr 06
Location: Kidsgrove, Staffordshire
User status: Offline
|
got any spare valves lying around. i used a bent one. its just the right diameter and its got a head to hit it on
|
lil_g
Member
Registered: 29th Oct 06
User status: Offline
|
Unfortunately not Been looking for something the right diameter to knock it out with 
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
use a screw driver on the lip bit of the pin and just give it a good beating
|
dannymccann
Member
Registered: 9th Aug 06
Location: Doddington, Lincolnshire
User status: Offline
|
As has been said, support the door using books or bricks or your dad or something so you are knocking the pin out straight
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Trolley jack also works for supporting the end of the door
|
