FAZ
Premium Member
Registered: 24th Nov 07
Location: Coventry
User status: Offline
|
as above? car has 2 subs, 2 amps, 2 sets components, neon lighting and strobes inside and out, all fuised near abttery and around DIY switch board?
dad keeps pestering me that im going to go up in smoke? what re the chances? i.e. what can the car take electrically?
neil
|
B3KAN
Member
Registered: 15th Feb 07
Location: Inverness, Highland
User status: Offline
|
If everythign is fused & wired correctly then as long as you have a good battery there should be no problems
|
Toby
Premium Member
Registered: 29th Nov 05
User status: Offline
|
yeah make sure its all well fused and make sure that if your using bullet connectors that the male is on the none battery side i.e. cablke from battery to female connecto then to male connecteor then other cable, this way if a wire came loose it wouldnt touch the chaissis and go up in smoke, allways use heat shrink aswell to insulate the connections
|
FAZ
Premium Member
Registered: 24th Nov 07
Location: Coventry
User status: Offline
|
i use insulatr tape, is that just as good? i dont use skimpy amounts of it. battery is a varat b18 and has oe 55amp altenator on 1.2 16v. cheers guys
|
carnuts
Member
Registered: 28th Aug 05
Location: Hertfordshire
User status: Offline
|
also make sure any holes in the car that the wire runs through is nice insulated with say a rubber grommet or something i seen fires because of that before
|