Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
This is a BTB exhaust manifold for x14xe/x16xe. The manifold itself is just short of 1 meter long, the collector has an inside diameter of 2.328" and an outside diameter of 2.505". Comes with a single wired lambda sensor with the plug cut off. but I doubt anyone who buys the manifold will use it. Rust in picture is only surface based.
Base price is £150 posted.
Note to potential buyers, this manifold will in no way fit a standard corsa exhaust system!
[Edited on 23-01-2009 by Olsrey]
[Edited on 23-01-2009 by Olsrey]
|
scotts v6
Member
Registered: 3rd Aug 07
Location: leeds west yorkshire
User status: Offline
|
now that is sexy
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by scotts v6
now that is sexy
Yeah and made a huge difference to power as well.
|
scotts v6
Member
Registered: 3rd Aug 07
Location: leeds west yorkshire
User status: Offline
|
how much u looking for mate will it fit an aircon a dont even no what engine a have in mine its a w reg 1.6 sport any idea ?
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by scotts v6
how much u looking for mate will it fit an aircon a dont even no what engine a have in mine its a w reg 1.6 sport any idea ?
I don't actually know if it will fit an aircon model as I don't know what obstructions there would be from the aircon. It will fit a 1.6 sport though.
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
Picture of it fitted to my non PAS and non aircon corsa.
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
top lad!!!
get this bought someone, he needs to fund a vernier pulley for his c20let
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by fazza
top lad!!!
get this bought someone, he needs to fund a vernier pulley for his c20let
And x-mas credit card bill
|
NeilGSI
Member
Registered: 14th Jun 08
Location: Northern Ireland
User status: Offline
|
would this fit onto a 14xe with power steering, and how do you adapt it to fit onto the engine?
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by NeilGSI
would this fit onto a 14xe with power steering, and how do you adapt it to fit onto the engine?
It fits the engine, but it will in no way fit a standard system. You'd need to get an adapter made to fit the rather large bore of the manifold collector.
|
NeilGSI
Member
Registered: 14th Jun 08
Location: Northern Ireland
User status: Offline
|
aw so its just were it would join the cat or decat it needs down sized a bit
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by NeilGSI
aw so its just were it would join the cat or decat it needs down sized a bit
Yeah just a "bit"
|
NeilGSI
Member
Registered: 14th Jun 08
Location: Northern Ireland
User status: Offline
|
lol, how much extra power does this give?
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by NeilGSI
lol, how much extra power does this give?
I had 113bhp on my 1.4 with a dbilas inlet manifold. But when we took the engine out we discovered the lower inlet wasn't bolted up properly to the head, by that I mean most of the bolts weren't even touching the manifold. So I don't know mate, it all depends on what other mods you have done.
|
NeilGSI
Member
Registered: 14th Jun 08
Location: Northern Ireland
User status: Offline
|
wel atm only got a straight through exhaust and k&n, but over summer am getting a power box, and was looking a four branch to add a bit more
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by NeilGSI
wel atm only got a straight through exhaust and k&n, but over summer am getting a power box, and was looking a four branch to add a bit more
Being honest your exhaust system will hold the manifold up.
|
NeilGSI
Member
Registered: 14th Jun 08
Location: Northern Ireland
User status: Offline
|
so really would need a full new system the right size for the manifold?
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by NeilGSI
so really would need a full new system the right size for the manifold?
Yes mate.
|
NeilGSI
Member
Registered: 14th Jun 08
Location: Northern Ireland
User status: Offline
|
ok dont have the money for all this atm, but thanks anyway,
free bump
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
Bump
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
Bump
|
Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
£125 posted
|
B3KAN
Member
Registered: 15th Feb 07
Location: Inverness, Highland
User status: Offline
|
You cudda cleaned it up first
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by B3KAN
You cudda cleaned it up first
Shutup you tart
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by Stu_22
£125 posted
I'll think about it
|