DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
After having regrets of selling my mid engined Nova project I want to build something insane again and I'm thinking of building a 4x4 Corsa VXR engined Corsa B, if I do I'll sell the 1.8 and I'm interested in what it could be worth?
I started with a rot free UBER BASIC 1.2 Merit shell, it weighs less than 900kg with me sat in it according to my local weigh bridge
Engine
X18XE1 Small Block 1.8 Engine
Induction Kit
EGR blanked
Stainless manifold
Straight through exahust system with 3" tailpipe
F13CR gearbox
Exterior
Resprayed (Flame Red)
White Cesaros on 195/50/15 Toyo Proxes
Bilstein -35 springs and matching shocks
GSI Front bumper (grille is now fitted and I do have the fog lights)
Colour coded arches
Post 97 rear bumper
Interior
Stripped Rear
Corbeau Forza Seats
Sabelt 3 Points
Club Black door cards (to match seats)
Chassis
Front upper and lower strut braces
Rear strut brace
Front 20mm ARB
Polybushed
Brakes
288mm Discs
V6 Calipers
Braided Hoses
Thats all I can think of at the mo
[Edited on 06-05-2009 by DaveyLC]
[Edited on 06-05-2009 by DaveyLC]
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
couple grand easy
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote: Originally posted by Nic Barnes
couple grand easy
Being serious? Fuck sight more than I was thinking
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
clean shell, resprayed, people seem to love these 1.8 conversions etc, engine less miles and newer than an xe, looks the part.
2k
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
yeah i would say 2k
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
lets be honest davey, all jokes aside. its a good looking car. engine conversion done like its factory. things like that sell a car easily than bodges together crap.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote: Originally posted by Nic Barnes
lets be honest davey, all jokes aside. its a good looking car. engine conversion done like its factory. things like that sell a car easily than bodges together crap.
I am supprised.. A couple of my mates were saying 2k+ I just thought they were being idiots!
|
Jon_C
Premium Member
Registered: 7th Dec 05
Location: Suffolk
User status: Offline
|
I would happily pay 2k for that
|
Luke
Member
Registered: 9th Dec 05
Location: Oxford Drives:Corsa B C20LET
User status: Offline
|
I need a run about. So i'll give you a grand
|
Jakey
Premium Member
Registered: 4th Jun 07
Location: Sandbach
User status: Offline
|
I'd pay £2k for that.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
fire it up for 2k see what happens. if you were thinking less, youve gained not lost anything.
new project sounds like something to look forward to reading about on here for sure
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
I was following a project on migweb, a guy has used the cav/cally running gear on a B, he's tubbed out the rear and made a space frame for the rear subframe and widened and braced the front of the tunnel to allow for the TX box..
I think I'd copy what he's done with the tunnel but I'd like to build my own rear arms using the standard rear beam pivot points and spring cups (plus two extra inner pivots) and make a full trailing arm setup. Would be easier to four link a chevette rear axel but the ratios wont be right
[Edited on 06-05-2009 by DaveyLC]
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
yeah i been reading that project also. its pretty impressive stuff.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Its the sort of stuff that floats my boat!
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
make it happen. i will read.
im just going to weld a calibra floor into a mk3 astra the easy way and go for 700bhp 4x4 blowing up vauxhall running gear every other week for a laugh.
|
LeeM
Member
Registered: 26th Sep 05
Location: Liverpool
User status: Offline
|
i'd pay £2k for that happily.
now this isnt something which i'd do or condone, but may appeal to some people out there... what engine was it originally and what is it logged with the dvla as?if it was originally a 1.0 it will be more appealing to a chav who can insure it as such
|
C00RSA
Member
Registered: 7th Jun 05
Location: Hertfordshire
User status: Offline
|
quote: Originally posted by Jon_C
I would happily pay 2k for that
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Yeah I've seen that white MK3 with the cally floor pan, that was pretty damn impressive work!
The way I see it 250-300bhp through four wheels in a shell that weighs next to fuck all should be pretty interestnig.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote: Originally posted by lee_wee
i'd pay £2k for that happily.
now this isnt something which i'd do or condone, but may appeal to some people out there... what engine was it originally and what is it logged with the dvla as?if it was originally a 1.0 it will be more appealing to a chav who can insure it as such
It "was" a 1.2.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
quote: Originally posted by DaveyLC
The way I see it 250-300bhp through four wheels in a shell that weighs next to fuck all should be pretty interestnig.
more than pretty interesting. sell up and make it happen. and dont go doing a turbo tom on us and teasing all of us that actually enjoy project threads that happen..............
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote: Originally posted by Nic Barnes
quote: Originally posted by DaveyLC
The way I see it 250-300bhp through four wheels in a shell that weighs next to fuck all should be pretty interestnig.
more than pretty interesting. sell up and make it happen. and dont go doing a turbo tom on us and teasing all of us that actually enjoy project threads that happen..............
Well I've got the space, skill and money but the problem is I get bored very quickly! Which was the demise of the Nova! I had build a rolling shell but I got sick of doing all the niggly bits!
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
must be worth near to 2k. was looking very nice next to me at combe
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Cheers mate
|
swill_omnibus
Member
Registered: 12th Dec 07
Location: : S. wales Drives: Dodge Caliber
User status: Offline
|
At the rate im going i would be happy paying 2k for it
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Want to buy mine and cut out the middle man?
|