cor5asri
Member
Registered: 11th Jun 09
Location: preston,lancs
User status: Offline
|
--------------------------------------------------------------------------------
i hav got a 1993 cav sri 8v and i am after puttin the engine in my1994 corsa sri 8v and require some technical knowledge.
locating the engine in the bay will i have to do any chopping?
what wiring will i have to modify?
plumbing the engine, is it all the same?
for the drive shafts what would be reccomended?
( i was thinking of using the cavalier box )
will the exhaust manifold snag?
and is there anything else you can think of which could be possibly a problem?
i trying to do all this on a samll budget and any help is grately appreciated!!!
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
from my reply in General:
2.0 8v yeah?
You can put the engine straight onto the corsa F13/F15 gearbox if you use the corsa flywheel.. The engine sits right over near the drivers side inner wing though you will need an engine mount..
As for using the cav gearbox, follow the XE guide, but to be honest you might as well get an XE if you are going to do that.
The exhaust manifold will hit the ARB if you've got one, the cheap option is to just remove the ARB
|