Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
Right in the year and a half iv had my xe its never been tappy! put sum 15w40 oil in it ( usualy put 10w 40 in it ) and when u gave it stress for a coulpe miles it would tap!soon as it cooled down the noise would go away again
Going to work yesterday it sat at 4k for about 10 miles and when u slowed down again could here the tappits?( had the music on so wouldnt have heard them)
Anyways let it cool down ( 4 hours ) and drives home still chaping away!
so far iv
Put lifter fluid in it
Put flush in it
Put 10w 40 in it
Swaped the tappits for known good ones
put oil over the top of them started it and left it over night
Still tapping away
[Edited on 16-08-2009 by corsaloonjc]
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Mine was tapping before the top end of the engine shat itself. When I took it apart I cleaned the tappets in a degreaser bin and it's totally fine now.
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
I only gave them a quick wipe, didnt want to mess about with them to much cos they were fine when they came out the spare engine
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
You have an engine that sounds like mine now
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
Wont be as loud as this tho!
For got to say its got piper fast road cams in it but they were fitted months ago
|
DaveB
Member
Registered: 29th Dec 00
Location: Huddersfield
User status: Offline
|
If it didn't used to tap, and now does. It's likely oil pressure related.
To be safe, buy and fit an oil pressure gauge.
To be abit safer, clean out the pressure relief valve.
To be durex safe; change the oil pump lol
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
Where is the pessure relie valve?
I thought about this but te light goes out rely quicky
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
Update!
Right riped to to bits starting from the top
New rocker cover gasket
Striped and free'd off the tappits
New valve stem seals
Skimmed the head
Head gasket
Striped and had a looky of the oil pump(fine)
New sump gasket
New oil pick up
Heres what i found
Sum of the tappits were stuck(weird cos its aneer been tappity
The oil pic up had a crack where it bolts on( out of the oil )
Started it tonight and its still sounds like its tapping its head in! any ideas
Forgot to say its well down on power sounds like its on 3
[Edited on 02-09-2009 by corsaloonjc]
|
Muzzy@VauxhallScotland
Member
Registered: 12th Nov 08
Location: Aberdeen
User status: Offline
|
Is your exhaust manifold tight and is it a new gasket on it?
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
yes its a new one and yeah its tight!
|
Muzzy@VauxhallScotland
Member
Registered: 12th Nov 08
Location: Aberdeen
User status: Offline
|
Possible that the tappets are sticking again. I used to find that alot with the 1800 16v Vauxhall engine that even after a flush, strip and clean they would still stick. Some cases you would have to work them for a good few minutes each to free them off completely.
Rather than using old tappets, i would consider buying new ones, i think they are around £7 each
[Edited on 03-09-2009 by Muzzy@VauxhallScotland]
|
Slammed_Corsa
Member
Registered: 30th Oct 05
Location: Greenock, Inverclyde
User status: Offline
|
Have you actually checked to see if oil is getting to the head?
Run it and take the oil cap off. If there is plenty there it will start to splash out.
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
not an injector clicking?
you can actually put an oil pressure gauge into the head itself to see how much pressure is getting to the head(grub screw between 2/3 cylinders on ex side)
is it still a top end tap? if had a crack in the pike up pipe you could either of killed the lifters of maybe even have a bottom end knock
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
Yeah there is defo oil getting to the top end! take the cap off and it spits it at u, took the cams out and theres loads of oil kickin about
IM now looking at replacing the block cos i think the small end is away
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
Mines started doing the same tonight
Revved it upto 5k and noticed a tapping when I let off. I got home and let it cool down. Started it up again after checking oil level, was getting 4 bar of pressure, Held revs at 3k and it cut out. Fired up again and got a bit of a chewing noise so crapped it and turned it off
Investigation to start tomorrow
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
Think I've found the cause of my tapping.
Checked compression and cylinder 3 is 0 Looks like i've dropped a valve.
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
eek you did well lol.
should have propperly cleaned the hydrolic lifters and the head in a hot de greaser bath would have got rid of any little bit of grit/metal filing's that can cause things to stick
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
quote: Originally posted by Richardhhha
eek you did well lol.
should have propperly cleaned the hydrolic lifters and the head in a hot de greaser bath would have got rid of any little bit of grit/metal filing's that can cause things to stick
That to me fella? Tappets were brand new. £130 from AV
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
yeah terry the top bit was to you lol
bottom bit is for corsaloonjc
|
Jordan C
Member
Registered: 3rd Dec 07
Location: Dundee City Drives: Valver Corsa
User status: Offline
|
haa no bad terry! sme boat then!
|