c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Hi my xe corsa wont start checkd crank senser nd al wire there fine any ideas
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
is there petrol gettin through? push the valve in on the fuel rail to see if petrol comes out
|
jaysc20xe
Member
Registered: 5th Feb 08
Location: cleck/leeds
User status: Offline
|
even tho the wires are fine it could still be nackard. I removed a running xe from one corsa and put it in another corsa and the crank sensor naffed up for no reason at all. Best trying a new one. Either that or the coil.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Fuel getin threw crank not that old so dont think its tjgat might try coil
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Could it b fuel relay
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Does your EML come on with ignition?
If it doesn't but it's wired in correctly, check your fuel pump relay!
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Wots the eml
|
jaysc20xe
Member
Registered: 5th Feb 08
Location: cleck/leeds
User status: Offline
|
quote:
Originally posted by c20xecorsa
Wots the eml
engine managment light
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
yer but there wouldnt be fuel goin through if it was the fuel relay as the pump wouldnt be workin
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
True dont no az a pull light owt because it woz on wit last engine
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
its gta be a spark problem if theres petrol gettin through, so check the plugs and leads and see if that helps
|
jaysc20xe
Member
Registered: 5th Feb 08
Location: cleck/leeds
User status: Offline
|
make sure its all earthed right. If its a dizzy type also check to make sure there no moisture in the cap and that its on right. Is it all wired properly because if ya don't have the ignition live wired up at the end of the loom it wont fire either.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Wiring ok still not workin
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
For a start, put the bulb back in the EML.
It'll be alot easier to diagnose the fault then.
Make sure the EML is wired up properly to work with the c20xe engine too.
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
And please speak english and not text speak..... this is a forum!
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Lol its coz i am on my phone lol its a habit and will try and put the bulb in today see if it stays on but what if the light goes off
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
If there's no spark it wont be the fault relay.
It will either be no ECU power, coil issue or a crank issue.
Do you get spark whilst cranking, or whilst the igntion is on?
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Eml light goes off wen it goes to start any ideas
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Well you didnt answer any of my questions for a start ! ;p
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
No spark at all for the q u ask but every thing else k but think it might b coil as it got realy hot and crank ok
|
