Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
this may sound stupid.
however i want to drill may airbox but have no idea where to drill it :/
amateur question but any help would be appreciate
pictures would be even better!
|
sri_baby
Member
Registered: 17th Feb 08
User status: Offline
|
if u open the airbox as if u were changin the filter, take the filter out and its the bottom part on the air box u need t b drillin hope this helps
|
Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
what any and everywhere at the bottom :L
|
Kevxx
Member
Registered: 14th May 08
Location: Forfar, Angus
User status: Offline
|
yep pretty much, below the filter..so the filter can still do it's job.
your just makimg holes, so it can suck in more air, use the noodle
|
Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
the noodle i dont have cheers for the help bud
|
grez12
Member
Registered: 30th Aug 08
Location: cleethorpes dn35
User status: Offline
|
make sure the holes are only on the bottem and on the innerwing side not the side closest to the engine as it will run like poo if it sucks in hot air from the engine
|
Ricky352
Member
Registered: 6th Apr 07
Location: Lisburn, N.I.
User status: Offline
|
I removed the piped from the inside, then drilled the front of the box full of about 6mm holes. The front being the side closest to the front of the car
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
take the lid off, and knock out the reducer inside of it.
Then inside the main body of the air box there is pipe bent 90' take that out.
Then there is a pannel on the side of the air box (facing inner wing) ether drill that or remove it.
Job done
|
mattcape
Member
Registered: 4th Aug 05
Location: Kings Langley Drives: Astra H
User status: Offline
|
there is a part on the bottom of the airbox that with a hammer and screwdriver will pop off this imo is the best way rather than drilling it!
|