chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
I need to sell my heavily worked 20SEH/NE (2.0 8v) head asap...
It has had quite a bit of work done to it, and drives extremely well! Spec list of the improvements is below:
- Newman 280deg Tarmac Rally cam. Suited to twin carbs or modified injection.
- New set of Newman rockers and lifters.
- Ported, Polished and skimmed.
- Valve seats and guides were all worked and renewed.
- Piper Vernier Pulley.
I spent quite a bit of money on this, and it certainly did what i wanted, with the power peaking at 6600RPM! Unfortunately, a very tired bottom end has been the restriction, but it has still been revving, and pulling all the way to 6.5k, where on the standard cam it ran out after 4.5k. It certainly made a massive difference, and with a bottom end in good condition it would certainly be a superb head!
I ran it on R1 bike carbs but like i say, the cam is designed for DCOE's and modified injection systems.
I am after £270 delivered for it...and considering what its cost me, and having only done about 2000miles, i think thats a resonable ask.
Any info or questions about either of this, give me a text/ring on 07707381866. Like i say, i need this gone ASAP to pay for suspension on the cav.
Thanks for reading.
[Edited on 27-11-2009 by chrex]
|
