upton20xe
Member
Registered: 28th Dec 09
Location: Halesowen, West Midlands
User status: Offline
|
hi ,
i have a coresa with a 20xe conversion, and about a week ago found a hole in the rad.
for a quick fix until i get my ally rad i put one in from a astra mk3 along with the fan , also changed over the switch/stat witch screws into the side of the radiator.
anyway fixed it in and wired it up and no my temp gauge goes to 100 degrees the fan will only come on for about 10 seconds take the temp under 100 go of then come back on.
how do i get the temp DOWN and the fan to stay in longer
WHAT HAVE I DONE WRONG??
CHEERS
|
Eck
Premium Member
Registered: 17th Apr 06
Location: Lundin Links, Fife
User status: Offline
|
I would just wire the fan to a switch mate.
|
upton20xe
Member
Registered: 28th Dec 09
Location: Halesowen, West Midlands
User status: Offline
|
yer i thought about that but just couldnt figure why it worked fine before hand ??
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
take plug off fan temp switch on the radiator, bridge the 2 pins inside the plug thats connected to the loom, not on the rad itself. turn ignition on, fan should be on igniton live. tape it up so bridged wire cant fall out and see how temp gets on.
|
davieslim
Member
Registered: 15th Sep 08
Location: Glasgow City
User status: Offline
|
my gsi astra did this, but then i fitted the switch from a corsa and it lowered it so the fan came in arorund 90
|
