c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Hi wel a can get a tigra with a x14xe engine free BUT the engine just making a clunkin sound he says its siezd wot will need replaced if engine siezed
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
Waterpump? al kinds of stuff?
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Wud just best to swap engine and he said might b starter motor
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
I that a question? swap engine, when might only be a starter motor? Use English
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote: Originally posted by c20xecorsa
Hi wel a can get a tigra with a x14xe engine free BUT the engine just making a clunkin sound he says its siezd wot will need replaced if engine siezed
I recognise most of the words you have used but I fail to see what you are saying.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
I have been offered a x14xe tigra the lad said the problem with it is it makes cluncking noise when you try 2 start it and it doesnt start due to this problem does this mean the engine is siezed or does it sound like something that can be fixed??
|
stingray1987
Member
Registered: 18th May 09
Location: Stoke-on-Trent
User status: Offline
|
could be a number of things. if i was you i would check the rest of the car over and if everything else is mint i would just get a x16xe engine and put that in there. only thing is to check everything it is handy to have the engine working lol. i wouldnt offer any more than £400-£500 even if in mint condtion. which i recon it most probs isnt if the engine has got to that state.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
A can get it 4 free got 2 months tax nd mot till october bodywork ok but ther was rust on he done a bad jobs sorting it nd inside a1condition
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
Take car, claim back tax, take engine out get money for scrapping car
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
It would b gud 4 parts but a want to see if a can get engine working
|
cjohnson
Member
Registered: 27th Apr 08
Location: silsden,west yorks.Drive: Astra van
User status: Offline
|
If you put the car in 5th gear and push it, the engine should turn over, not start, just turn over if you get me? If it does, the engine isn't seized but could be a number of things. Can of worms I reckon mate.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Done it and it just clunks wen clutch in and wen u try nd turn it over wen clutch owt it jutters nd clunks
|
stingray1987
Member
Registered: 18th May 09
Location: Stoke-on-Trent
User status: Offline
|
doesnt sound like its worth the hassle. there is a 16xe for sale on here for only £150 its not worth messing about with that one for that price.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Am not paying any thing for the car nd am not botherd of work az its goin to be a hobie just want to no if engine nakerd b4 a buy 1 or just renew sum parts lyk starter,altenater, crankshaft senses ect
|
stingray1987
Member
Registered: 18th May 09
Location: Stoke-on-Trent
User status: Offline
|
ok then the best way to see if the enigne is seezed is to jack up the car and take off the drivers wheel and the bit of plastic in the inner arch so you can see the crank pully.
then put the car in neutral find a socket that will fit the bolt in the middle and turn it round clockwise. keep turning untill the engine has made at least one full turn. it mite be easyer to take off the cambelt casing and mark the cambelt and keep turing untill the belt has gone all the way round.
1- if it goes all the way round then it is not seezed.
2- listen out for nocks and feel if it goes realy hard to turn in areas. (do not force it to turn).
your could also take out the sparkplugs and place long sticks down into the holes that will show you the pistons are moving up and down.
if it wont turn at all then i wouldnt entertain fixing the engine as the parts would be more than buying another enigne
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
now thats a big help stingray al try al that wen a get time and let u no
|
stingray1987
Member
Registered: 18th May 09
Location: Stoke-on-Trent
User status: Offline
|
okey doke
well good luck and i hope it isnt seezed up.
if you need any more help i would try get intouch with jenkosport he is the one that helped me put my engine back together when i striped and rebuilt it.
|
c20xecorsa
Member
Registered: 8th May 09
Location: Hebburn, Tyne and Wear
User status: Offline
|
Will do
|