Root
Member
Registered: 28th Dec 08
User status: Offline
|
for personal use
-do you need 2 guns? 1 for paint and 1 for clear coat?
-what size compressor is big enough to do a corsa shell?
-any other parts I need?
what about safety? are there any ways to ventilate a brick garage?
cheers
|
scottyp1989
Member
Registered: 29th Jul 07
Location: Warley, West Midlands
User status: Offline
|
would of thought one gun would be ok just wash it out before you put clear coat in. could be rong tho i know bugger all about spraying lol,
as for ventilation you can get ventilation bricks that are standard house brick size or bigger depending on what its built out of, and an extractor fan, i used an old radiator fan in mine connected to a 12v transformer plug and cut hole out of wall
|
AndyCorsaSport
Member
Registered: 12th Feb 06
Location: Horsforth, West Yorkshire
User status: Offline
|
Compressor for a shell, 100ltr might do it, id go for a 200 though if i were you. Use 2 guns yeah, just easier that way, then you know you have one for paint and one for laquer.
Fuck knows about ventilating garage, but id get a water trap for the compressor too.
|
Eddx14xe
Member
Registered: 12th Jan 10
Location: Hertfordshire
User status: Offline
|
How big is your budget?
i want to do some bits on my car but dont earn much money, so was looking at ebay ones for £115 with a hose and spray gun, as thats all i can afford.
From what ive read on here its more the CFM that you need to look at
|
Root
Member
Registered: 28th Dec 08
User status: Offline
|
cheers people, i'll look at the costs of 100ltr vs 200.
what's a water trap and what's a CFM?
my budget, well, i'll be buying the parts bit by bit until I have the full set up ready to do my car. I'm not bothered about it looking the best paint job in the world, but as long as it's a good one, that's all that counts
[Edited on 31-03-2010 by Root]
|
Daveskater
Premium Member
Registered: 29th Apr 08
Location: Oxford, UK Drives: Jap wagon
User status: Offline
|
CFM is an imperial measurement of volumetric flow, the metric equivalent would be l/s or m^3/s (that's litres/second and meters cubed per second). The only difference between the two metric ones is l/s = m^3/s x 1000.
Numberwang!
Originally posted by AlunJ
I like you Dave, you are a man of men
Originally Whatapp'd by Neo
Dave's maybe capable of a drive-by cuddle
Look at my pictures
|
Eddx14xe
Member
Registered: 12th Jan 10
Location: Hertfordshire
User status: Offline
|
CFM
•CFM (Cubic Feet per Minute) is the imperial method of describing the volume flow rate of compressed air. It must be defined further to take account of pressure, temperature and relative humidity
|
ecclesturbo
Member
Registered: 6th Jan 08
Location: staffordshire
User status: Offline
|
if your after a half decent paint job thats easy use a cellulose dont have to laquer it then
|
Root
Member
Registered: 28th Dec 08
User status: Offline
|
quote: Originally posted by ecclesturbo
if your after a half decent paint job thats easy use a cellulose dont have to laquer it then
heard about this type of paint before, what's the difference? is it shittier quality compared to 2pack?
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
-do you need 2 guns? 1 for paint and 1 for clear coat?
NO i have always painted and cleared with same gun with 1.4 tip.
I do have 2 guns, 1 for primer (1.8 tip) and 1 for paint/clear BUT jobs can be done with 1 gun
-what size compressor is big enough to do a corsa shell?
You need a good size really, as you need to hold a good amount of pressure for the whole time, but people paint at differant pressures. I paint at 30psi.
150lt would be best in my eyes, but could do it with a smaller BUT could take some time to make sure pressure at the gun is always there.
-any other parts I need?
In line water traps
Pannel wipe
Tack cloths
mixing cuts
Ultra Clean area
Some way of removing the paint in the air
Half an idea how to mix and apply the paint as each one is differant (2pack, water base etc)
Mask
LOADs of little things, but list above is a good start
My advice would be find a local paint shop and ask can you sweep up for a few weekends, an watch them paint, prep etc
I went to collage for 4 years to learn
[Edited on 31-03-2010 by BeArDy]
|
ecclesturbo
Member
Registered: 6th Jan 08
Location: staffordshire
User status: Offline
|
its like a gloss doesnt really need laquer,i wouldnt say its a crap paint like an old style paint,pay good money for some ull get a top paint job,saves havin to mess around with laquer etc,have to be carful when using a 2 stage paint because it can react more and looks shite if it happens
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
can react just as bad or worse in 2k, still get a nice finish though
|
ecclesturbo
Member
Registered: 6th Jan 08
Location: staffordshire
User status: Offline
|
thats true heat always helps alot
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
yh dont paint in a cold room big no no
|
Root
Member
Registered: 28th Dec 08
User status: Offline
|
summer time is perfect then
I've heard after you do paint, don't buff it up for 1 month if you don't have heaters to dry the paint.
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
nar mate is bullshit. 1 to 2 full days tops
|
ecclesturbo
Member
Registered: 6th Jan 08
Location: staffordshire
User status: Offline
|
who told you that as long the paint isnt tackey fire away just leave it to cure for a day or so if not using a booth or baker,if you have a roof that leaks anywere get it fixed if water gets onto the paint its nakerd.
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
not nesecerally, ive painted cars outside before got spots of rain on before its dry and it flats right out, wouldnt suggest it though lol back in the day. just remember lots of heat, de grease properly one nice thin coat all over let it tack of then a couple of full coats
|
Ant B
Member
Registered: 4th Jan 09
Location: Woodford Halse, Northamptonshire
User status: Offline
|
i have only got one spray gun and i use that for painting colour and then i run thinners though it after and use the gun for clear,at the moment i use rattle can primmer but im buying a nother gun soon for primer,but yeah i just run paint thinners through the gun after changing from paint to clear and also after ive finishd and i also wipe inside and out side of the gun after to get rid of the exxes thinners,
and if im painting a small object like petrol flap i leave it indoors for about a week to fully dry a nd cure
[Edited on 01-04-2010 by Ant B]
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
u dont need 2 guns for painting anyway, its just you can buy base and clear guns if u want to be fussy and get "perfect" finishes on both..waste of time unless you want to go pro
|